How do you properly gauge your ears?

How do you properly gauge your ears?

To prepare your ears for stretching, apply a warm compress to the piercing for several minutes in order to ease up the tissue and make the stretch easier. Then, wash the area, rinse well and pat dry. Once you’re ready for the stretch, apply oil around the perimeter of your piercing.

What you should know before stretching your ears?

9 Things To Know If You Get Your Ears Gauged

• Your Earlobe Holes May Never Get Back To “Normal”
• You Can Repair Gauged Earlobes.
• You Should Wait Eight To 10 Weeks Between Stretches.
• Tears Can Cause Scar Tissue.
• Pain While Stretching Probably Means You’re Damaging The Tissue.

How long do you keep 14g tapers in?

Here is a good example timeline to get from regular piercing to 00 gauge: 16g to 14g – 1-2 months. 14g to 12g – 1-2 months. 12g to 10g – 2-3 months.

Should sizing up gauges hurt?

Yes, there will be some discomfort, but your ears should not be screaming in pain. If this is so please go to your local piercer for care. Is ear stretching supposed to hurt? When sizing up your ears may be sore, but you should not be in pain.

Does gauging your ears hurt?

Does ear stretching hurt? Ear stretching tends to tingle or sting but it shouldn’t hurt a lot. If your earlobe feels tight or you’re in pain after inserting the taper or plug, then the size is too big and you should opt for something smaller.

How long should you wear tapers before switching to plugs?

If you have recently stretched your ears you should wait around four to eight weeks before trying to wear double flared plugs. To insert double flared plugs you’ll be using the “button up” method, where you’ll be inserting them the same way you would thread a button – at an angle, to get the edge in first.

Is it bad to keep tapers in your ear?

They are only for wearing in healed stretches as jewelry because they are porous and can carry too much bacteria. In general, tapers are only recommended for wearing in smaller gauges as jewelry. Large gauge tapers will pull the ear unevenly because of the heavy side of the taper.

Can you wear tapers overnight?

This is painful and incredibly unpleasant and bloody. Repeat until you get the taper all the way in. Leave it for at least a couple of hours, ideally overnight. Later or in the morning, keep pushing the taper out and insert your sterilized plug with your clean hands.

How do I start gauging my ears?

To stretch your ears, you would get a set of tapers, push the taper all the way through the hole, and replace it with a gauge the same size as the end of the taper. By the time you complete the set, your ears should be stretched as large as you want. Never wear tapers as jewelry.

What size should you start gaging your ears at?

Begin stretching your ear with a size 16 or 14 gauge. Ears are typically pierced using an 18 or 20 gauge, so 14 is the largest size you can start on and avoid damaging your ears. Starting at any larger than this size puts your ear at-risk of tearing.

How long should I wait Inbetween gauging my ears?

At larger sizes, you should wait at least two or three months , since the jump between sizes get bigger as you go up. But these suggestions are just the bare minimum. The longer you wait, the easier it will be on your ears to go to the next size, and the less risk there is of problems like scar tissue or blowouts.

What are the steps to gauge your ears?

How to Stretch or Gauge Your Ears Step One: Soften Tissue. Start by taking a steamy bath or shower to soften the tissue. Step Two: Clean. Wash the taper, the jewelry, your earlobes and your hands thoroughly with medical-grade antibacterial soap. Step Three: Lubricate. Apply liquid antibacterial soap to your earlobe and the taper. Step Four: Insert Taper. Step Five: Insert the Jewelry.