Why is my simplehuman trash can not working?
If it still does not open, the batteries may be low or sensor can may need to be reset. Wipe the sensor lens clean using rubbing alcohol. Wait 1 minute, then re-insert new alkaline batteries or plug the unit back in. If you’re using batteries, we recommend using alkaline batteries like Duracell or Energizer.
How do I contact simplehuman?
For orders over $2,000, contact us or call 1-877-988-7770.
How do you reset the sensor on a simplehuman trash can?
Try resetting your sensor can:
- Turn the power off by removing one battery.
- Put your hand over the sensor for about one second until the LED light blinks once to indicate that the power and electronic memory are completely drained.
- Turn the power back on by reinserting the battery removed.
How do I find my simplehuman registration number?
The serial number is on the rear or bottom of most products. It begins with 1 letter followed by 8 numbers. Please note that the serial number is required to register on our website. If the item is not registered, we can still honor the warranty on your product.
Why is my touchless garbage can not working?
GENERAL TROUBLESHOOTING STEPS Make sure no sunlight or direct light shines on the sensor. Turn on the power and try opening lid again. (3) If trash can is still not working correctly, remove the batteries or AC adaptor. Let trash can sit for at least 2 hours to reset.
Why is my simplehuman trash can blinking red?
Red/blue light is flashing continuously. Batteries may be low or sensor can may need to be reset. Make sure there is no power to the unit – remove the batteries or unplug the AC adapter’s power cable from the sensor can.
Who owns simple human?
Frank Yang
simplehuman
| Type | Private |
|---|---|
| Founder | Frank Yang |
| Headquarters | Torrance, California |
| Key people | Frank Yang, CEO & Founder |
| Products | trash cans, kitchen and bath tools, organization tools |
Why are simple human garbage cans so expensive?
This is because these trash cans are frequently exposed to moisture, and their construction must be able to withstand it. Even though garbage cans are simply bins that are used to store trash for a brief period of time, they can be quite costly.
How do you fix an automatic bin?
Ensure that the product is turned on with the main switch on the back of the lid. When the product is switched on correctly please wait approximately 10 seconds before trying to use. If bin lid is working correctly, the red light should flash every 7-10 seconds.