What fluid does a Dana 80 take?
Dana 80 Differential Specs Ford calls for 4.2 quarts, Dodge calls for 3.4 or 5.0 quarts depending on the application – always fill differential until oil reaches the fill plug level. Limited slip differentials may require an additive, refer to owners manual.
Is Dana 80 limited slip?
The Dana/Spicer Model 80 is an automotive axle manufactured by Dana Holding Corporation and has been used in OEM heavy duty applications by Chevrolet, Dodge, and Ford. The OEM Limited slip differential originally was a “Power Lok” until 1998 when the “Trac Lok” phased it out. …
What gear ratio is a Dana 80?
Revolution Gear Dana 80 3.55 Ratio gear sets are made from the highest quality steel and are precision heat treated to OEM specifications, making for the best aftermarket gears available.
How wide is a Dana 80?
The super-tough Dana 80 rear axle ranks as one of the most desirable axles for off-highway use. It’s a full-float unit with 11.25-inch ring gear diameter; 1.625-inch (minimum diameter) 37-spline pinion shaft; 11/2-inch-diameter, 35-spline axleshafts; and a 4-inch axletube diameter.
How much is a Dana 80 worth?
A Dana 80 front axle without the adjustable knuckles will run about $6,240. Exact pricing will vary depending on your choice of locker or limited-slip, axleshafts, brakes, etc.
Is a Dana 80 a good axle?
Heavy Hitter. The super-tough Dana 80 rear axle ranks as one of the most desirable axles for off-highway use. It has an 11,000-pound gross axle weight rating and a continuous manufacturer’s output torque rating of 2,500 lb-ft.
What kind of oil do you use in a 12V Cummins?
There are some really great 15W-40 Diesel engine oils for the 12V and 24V 5.9L Cummins engines. Shell Rotella products are excellent and i’ve used them in several of my Cummins-equipped Dodge Ram trucks.
What should I do if my Cummins is leaking oil?
Check all components holding oil or fluid for leaks. Check your driveway or wherever your truck is normally parked for signs of any leaks Check your tires for nails, screws, bulges, or other damage. Follow these service schedules if you have a 1994-1998 12 valve 2nd Generation Cummins.
What parts do I need for 2nd Gen Cummins maintenance?
The following chart is a collection of the parts you will need for 2nd Gen 5.9L Cummins Maintenance. When it comes to filters, you’re going to want to stick with Fleetguard or Mopar products. Aftermarket filters don’t offer the same filtration characteristics and because of their lesser quality, they can lead to premature part failures.
Do I have a 12 valve or a 24 valve Cummins?
Its important to know if you have a 12 valve or a 24 valve engine. The 12 valve will have very similar maintenance intervals and use many of the same parts as the first gen Cummins. This engine is found on 1994-1998 2nd Generation Cummins pickups. Beginning with 1998.5 model years trucks, a 24 valve design is used.