How do I factory reset my DSC?

How do I factory reset my DSC?

You can reset a DSC Impassa to factory defaults by first unplugging the AC transformer and disconnecting the battery to cut power. Then connect a jumper between inputs IO1 and IO2. Power up the panel, wait 10 seconds and power down. Then disconnect the jumper, and power the system back on.

Where is the reset button on a DSC alarm?

Hold down the reset button for 2 seconds. This button is usually located on the bottom right side of the keypad. Hold it down for at least 2 seconds to disengage the alarm.

How do I reset my alarm panel?

How Do I Reset My Alarm System?

1. Disconnect the backup battery. Open up the system, and disconnect the backup battery.
2. Unplug the transformer. Locate the transformer, and unplug it from the wall outlet.
3. Power on. Plug the transformer and the battery back in.

How do I reset my DSC alarm after a fire?

To cancel fire alarm press [#] within 30 seconds of alarm, otherwise the signal will be sent to the Central Station. To reset the smoke detectors press [*] then hold down the [4] for several seconds. A trouble will be indicated by the Trouble light which will remain on until the trouble condition is cleared.

How do I reset my DSC alarm after replacing the battery?

How to Reset a DSC Alarm After the Power Has Been Off

1. Press and hold the “RESET” key for 2 seconds.
2. Press the buttons “*72” if the alarm does not reset after pressing the RESET button.
3. Check the sensors if it still does not turn off.

How do you clear the memory on a DSC alarm system?

To clear the memory, arm and disarm the system. Certain sensors (such as smoke detectors and glass break detectors) have to be reset after an alarm. To reset detectors, press and hold the RESET key () for 2 seconds.

How do I reset my old DSC alarm without the code?

How to Reset a DSC Alarm After the Power Has Been Off

1. Open the access door on the unit. Video of the Day.
2. Press and hold the “RESET” key for 2 seconds.
3. Press the buttons “*72” if the alarm does not reset after pressing the RESET button.
4. Check the sensors if it still does not turn off.