Is the Brother HL-2140 a wireless printer?

Is the Brother HL-2140 a wireless printer?

The HL-2170W is a network laser printer that is ideal for home or home office printer sharing. Offering the same print speed, footprint and paper handling as the HL-2140, the HL-2170W also includes built-in Ethernet and wireless 802.11b/g network interfaces for connecting to your wired or wireless network.

How do I reset my HL-2140?

Brother HL-2140 – Reset Toner Cartridge

1. Ensure the printer is turned off.
2. Open the printer front cover.
3. Hold the Go button while turning the printer on.
4. When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button.
5. Press the Go button two (2) times.

How do you remove the paper jam on a Brother HL-2140?

Clear paper jams.

1. Open the front cover and leave the machine for at least 10 minutes to cool down.
2. Slowly take out the drum unit and toner cartridge assembly.
3. Close the front cover.
4. Pull the paper tray completely out of the machine.
5. Use both hands to slowly pull out the jammed paper.

How do you load paper in a Brother HL 2140?

Load paper in the paper tray

1. Pull the paper tray completely out of the machine.
2. Adjust the tray length if needed:
3. Press and slide the paper guides to fit the paper.
4. Fan the stack of paper well.
5. Load paper with the printing surface face down in the paper tray.
6. Make sure the paper is below the maximum paper mark .

How do I reset my brother hl 2140 drum unit?

To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. Close the front cover. Make sure that the Drum LED is now off.

How do I reset my Brother HL 2240 printer?

Brother HL-2240 – Factory Reset

1. Turn off the printer.
2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
3. Release GO, all the LEDs will turn off.
4. Press GO ten (10) times. The printer will automatically restart.

How do you remove a paper jam from a Brother laser printer?

Follow these steps:

1. Unplug your Brother machine from the AC power outlet (electrical socket).
2. Pull the paper tray (1) completely out of your Brother machine.
3. Pull out the jammed paper (1).
4. Lift the Jam Clear flap, and remove the jammed paper.
5. Put the paper tray firmly back in your Brother machine.

How do I reload my Brother printer with paper?

Load Paper in the Paper Tray

1. Pull the paper tray completely out of the machine.
2. Press and slide the paper guides to fit the paper.
3. Fan the stack of paper well.
4. Load paper in the paper tray with the printing surface face down.
5. Make sure the paper is below the maximum paper mark ( ).

Do I need to replace the drum on my Brother printer?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do you install a brother printer?

Open your printer box and connect your new Brother Printer to your computer using USB cable. Press the power button of the printer and a pop-up window will appear at your desktop to initiate the hardware installation process.

How to download brother printer driver?

Go to Brother Product Support Center.

Type your Brother printer model number. Then click Search icon. Or you can browse your product.

Click Downloads.

Choose your operating system under Downloads dialog. Then click Search.

Click Printer Driver under Drivers dialog.

Click Agree to the EULA and Download.

When it’s done,double-click the downloaded .exe file and follow the on-screen instructions to install the driver on your computer.

How do you download a brother driver?

Go to the site of Brother Product Support Center and input the Brother Printer model number in the search box and then search for it.

The relevant platform such as Windows,Mac,Linux,or Mobile. The relevant OS Version. Then,click on the Search button to fetch the relevant drivers package.

Finally,click the Printer Driver under Drivers to download a Brother Printer driver.

You will receive a prompt. You will need to agree to the End User License Agreement and then download it on your system and unzip the folder.

Furthermore,you will have to double click on the .exe downloaded file to initiate the process of auto-installation.

After running this file,you will need to follow few on-screen instructions and wait till the installation completes.

Reboot your Windows computer to bring the changes into effect. Settings > Updates&Security > Windows Update > click on Check for Updates button.

What is a brother printer driver?

Brother All-in-One Printer drivers are tiny programs that enable your All-in-One Printer hardware to communicate with your operating system software. Maintaining updated Brother All-in-One Printer software prevents crashes and maximizes hardware and system performance.