What is the standard air hose connector?
The most common size fitting is ¼ inch. This is true for both ¼ and 3/8 inch air hose. Most 3/8 air hose comes with ¼ inch ends on it, thus most use a ¼ inch air fitting. Another important thing to consider when choosing the right size fitting is what size of thread is your air tool or air compressor.
What is the standard air hose fitting size?
Thread sizes are typically 1/8″, 1/4″, 3/8″, 1/2″ or 3/4″ pipe thread. A fitting that has female pipe threads (FPT) can only mate to something with male pipe threads (MPT) that are of the same pipe thread size. Nominal – the inner diameter size that the compressed air passes through.
How many types of air fittings are there?
Types of Air Hose Fittings There are two main types: automotive and industrial (the ones you’re most likely to see). Automotive versions are T-Style and Type C, and are generally blue. Industrial models, M-Style and Type D, are usually red.
Can I connect 2 air hoses together?
Adding another air hose and installing the fittings the same way will allow you to connect the two air hoses together. One air hose plugging into the tank or compressor then on the other end the two hoses will also connect together end to end doubling the total length.
How do I know what size air hose I need?
Flexible air hoses are measured by their inside diameter (or I.D.). The larger the inside diameter, the greater the airflow (SCFM). Choose the inside diameter sizing based on the length of the compressed air hose (see Step 1) and on the air consumption of the pneumatic tool or equipment.
What is an air fitting called?
A pneumatic coupling is used to connect compressed air tools to a compressed air line. In the pneumatics industry, a pneumatic coupling can be referred to by numerous names. For example, an air hose coupling, compressed air coupling, pneumatic coupling or compressor coupling refer to the same product.
What are air line fittings?
Air-line fitting. This article is a compendium of hand-operable air-line fittings, typically of quick-disconnect type, used for pneumatics and other compressed air purposes including breathable air (a subset of breathing gases ).
What are orifice fittings?
Orifice Fittings. Orifice adapters are compact and cost effective way to pre-set, a specified orifice in specific hydraulic tube or hose line. Costly flow control valves can be eliminated or minimized in a system and hydraulic system maintenance managers can be assured that end users are not adjusting the factory established flow…
What is PVC air hose?
PVC air hose. Characteristics. Being made of tough PVC materials and high tensile polyester reinforcement,PVC air hose can work under very high working pressure. It is light, flexible, durable, durable, anti-erosion, and explosion resistant. Application.
What are PVC pipe fittings?
PVC Fittings Drain, waste and vent fittings made of polyvinyl chloride (PVC). PVC-DWV fittings are used for residential and commercial sanitary systems. PVC is one of the thermoplastic materials most frequently specified for a variety of products used in the pipe and fittings industry.