How do I connect my Canon MF4770n to WIFI?

How do I connect my Canon MF4770n to WIFI?

Method 2: Connect The Device To Wireless LAN

1. Connecting Using WPS (Push Button Mode)
2. Under “Menu” section choose the options in the following order: Network Settings > > Wireless LAN Settings > > WPS Push button Mode > > Yes.
3. Hold and tap the WPS button on the wireless LAN router for around 5 seconds.

How do I connect my Canon MF4770n to my computer?

You can connect the machine to the computer through a wired router. Use the LAN cables to connect the machine to the wired router (or hub). Make sure that there is an available port in the router to connect the machine and the computer. Have a LAN Cable of Category 5 twisted-pair cable or higher ready.

How do I scan with Canon MF4770n?

You can scan a document using the keys on the operation panel. To scan using the shortcut keys(MF4890dw/MF4880dw/MF4770n Only):…

1. Place documents.
2. Display the Scan mode screen.
3. Press [ ] or [ ] to highlight , and then press [OK].

Does Canon mf4770n have WIFI?

You can connect the machine to the computer through a wireless router*. Since it is connected wireless, no LAN cables are needed.

How do I find the IP address on my Canon mf4890dw?

Confirming IPv4 address settings Press [ ] or [ ] to highlight , and then press [OK]. Press [ ] or [ ] to highlight , and then press [OK]. Press [ ] or [ ] to highlight the options you want to confirm, and then press [OK]. View the information.

How do I connect my Canon MF 240?

Setting Up Connection Using WPS Push Button Mode

1. Press .
2. Use / to select , and press .
3. Select , and press .
4. Read the message that is displayed and press .
5. Select , and press .
6. Select , and press .
7. Press and hold the WPS button on the wireless router.

How do I scan with Canon imageclass?

Scanning an Image from an Application

1. Place documents. note:
2. Press [ ].
3. Press [ ] or [ ] to select , and then press [OK]. The machine is now waiting to scan.
4. Start the application to be used.
5. Select a scanning command.
6. Select a scanner driver.
7. Specify the scanner settings as needed -> click [Scan].

Where does the paper go in a Canon imageclass printer?

2. Insert the paper and align the paper guides against the width of the paper. Load the paper with the print side face up. Insert the paper 3/8″ to 3/4″ (10 to 20 mm) into the manual feed slot, and then slide the paper guides inward until they are aligned securely against the edges of the paper.

Where is the toner on a Canon printer?

Replacing the Toner Cartridge

1. Hold the operation panel.
2. Lift the scanning platform.
3. Hold the grip on the left front side of the toner cover.
4. Open the toner cover.
5. Remove the toner cartridge.
6. Gently shake the toner cartridge five or six times to evenly distribute the toner inside the cartridge.

How do I find my Canon printer IP address?

Canon includes a utility called the Canon IJ Network Tool. Open that, and from the Settings menu select Configuration. You’ll see the printer’s (current) IP address.