Are electric fireplace remotes universal?

Are electric fireplace remotes universal?

Do You Have a Remote for My Electric Fireplace? In many cases, these remotes are much more specific to the fireplace they came with, and we do not carry universal remotes capable of replicating these features. Your best option will likely be to contact the manufacturer directly to locate a suitable replacement.

Can I add a remote to my fireplace?

Yes, you can add a remote to your gas log set after it’s been installed and the log set is already equipped with a millivolt valve. You may even be able to completely convert your gas log set to a remote control system with variable flame and thermostatic controls.

How do you ignite a Skytech fireplace?

Slide the 3-position button on the remote receiver to the • ON position. The main gas flame (i.e., the fire) should ignite. Slide the button to • OFF. The main flame should extinguish (the pilot flame will remain on).

How does a Skytech remote work?

The remote control transmitter runs on (1) 12V battery that operates a 2 button ON/OFF function which transmits wirelessly to a receiver that operates on (4) AA batteries. The receiver connects to all standard millivolt valves, and can be mounted up to 20 feet away from the fireplace.

Why is my Skytech remote not working?

Make sure all batteries are correctly installed in the transmitter and receiver. Also check that the batteries are fully charged. Make sure the hand-held transmitter and remote receiver are communicating properly (see LEARNING TRANSMITTER TO RECEIVER section). …

How do I reset my Skytech remote?

To reset the codes, simply press and hold the same “Learn” button for a solid 10-15 seconds after which you should hear consecutive beeps indicating the memory has been cleared.

Can you turn on electric fireplace without remote?

Flames can be controlled using the flame effect switch, which you must turn on if installed differently from the main power switch. You can use the flame dial to control the flame’s brightness, and you can use it to control how bright or dim the flames appear.

What is a thermostatic remote?

Thermostatic Remote Controls: Thermostatic remote controls can control your fireplace based on temperature to help regulate the feel of a room. These units allow you to control your fireplace using either Bluetooth or WiFi—a great option if your home already features smart home tech.

How do I install acumen fireplace remote?

Step By Step Guide

1. Locate the Receiver Box. Most often, your receiver box will be located within the control cavity of your fireplace (seen in the image above).
2. Remove the Batteries.
3. Turn the Receiver Box to the Off Position.
4. Re-Insert the Batteries.
5. Re-insert Remote Batteries.
6. Press the On Button.
7. Change the Dip-Switches.

How to troubleshoot a Skytech fireplace remote?

How to Troubleshoot a Skytech Fireplace Remote. 1 1. Locate the Receiver Box. Most often your receiver box will be located within the controls cavity of your fireplace, like it is here – check to make 2 2. Replace the Batteries. 3 3. Perform the Learn Function. 4 3. Continued. 5 4. Reset the Memory.

How do I Sync my fireplace remote to my receiver box?

If your remote has both buttons, press the “On” button. At this point, you should hear a beeping noise again and your fireplace should immediately turn on indicating your fireplace remote control has been synced with the receiver box.

How much is the Skytech 1001 remote control?

Free Shipping over $49. Call now with any questions: 1-877-374-9002. Skytech 1001 On/Off Fireplace Remote Control 6 Review(s) Regular Price: $174.00.

Where is the receiver box on a Kenmore gas fireplace?

1. Locate the Receiver Box Most often your receiver box will be located within the controls cavity of your fireplace, like it is here – check to make sure the wires are secured tight to the terminals.