How do I reset my Lutron occupancy sensor?

How do I reset my Lutron occupancy sensor?

Step 1: Quickly triple tap and hold the Test or Light button on the Sensor. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for a few seconds until the dome LED begins to flash slowly (approximately once per second). The Sensor has now been returned to Factory Default Settings.

What is the blue wire on a motion sensor?

The low voltage occupancy input (Blue wire) and DC return (Black wires) of the power packs must be connected together for all power packs to operate together as one. Connect the Blue (occupancy) wires of all power packs and sensors together. Connect the Black (return) wires of all power packs and sensors together.

How do you override occupancy sensor?

If you turn the switch off and on within a second or so, the light will stay on, and this overrides motion detection. To go back to normal operation, turn the switch off and wait ~10 seconds, then turn back on.

How do you make a motion switch stay on?

One of the quick tricks you can try is to quickly turn the motion sensor ON, OFF, ON to override the motion detection and make the light stay on. To go back to motion detection mode, turn the motion sensor switch off and wait for about 10 seconds, and then turn it on again.

Can I use a motion sensor switch on a 3-way switch?

When using in a 3-way application use one sensor and one standard 3-way switch. Cannot be used with another sensor, or in a 4-way application. WARNINGS AND CAUTIONS: If you are not sure about any part of these instructions, consult an electrician.

Can I put a motion sensor on a 3-way switch?

It will connect to the remaining two wires that used to connect to your old 3-way switch. Because it will need a little bit of power to operate the sensor itself, the motion sensor switch will also need to be connected to the white neutral wires.

What is an occupancy sensor switch?

Occupancy sensor. Jump to navigation Jump to search. An indoor light switch equipped with PIR-based occupancy sensor. An occupancy sensor is an indoor motion detecting devices used to detect the presence of a person to automatically control lights or temperature or ventilation systems.

What is an occupancy switch?

occupancy sensor. An electrical switching device that turns on the lights in a room when an occupant enters and turns them off when the occupant leaves.

What is a ceiling occupancy sensor?

The Passive Infrared (PIR) Technology senses occupancy by detecting the difference between heat emitted from the human body in motion and the background space.

  • PIR Ceiling Sensor Switch works best in offices,copy rooms,storage closets,small conference rooms,and other common areas where there are high levels of occupant motion.
  • PIR Ceiling Sensor Switch turns lights On/Off automatically when people enter or leave a room
  • What is a Lutron lighting system?

    Daylight Harvesting. By using shades in conjunction with dimmers, Lutron systems can create the perfect balance between the two sources of light to save energy and create an inviting environment. Dimming modifies the quantity of electric lights, which in turn are complimented by the proper shade fabric and control that filters daylight.

    Begin typing your search term above and press enter to search. Press ESC to cancel.

    Back To Top