What is Sal Bando doing now?
Currently, Bando is CEO of Middleton Doll Company, a Columbus, Ohio, enterprise with multiple other businesses associated with it.
How do you read V belt codes?
The number following it is the outside length of the belt in tenths of inches. The inside length of the belt is typically 2″ less for a 4L belt, and 1-1/2″ less for a 3L belt. An example would be 4L460, which would be 46″ long outside, 44″ inside.
What do the numbers mean on a timing belt?
On metric sizes the number is how wide the timing belt is in millimeters. On standard sizes the number breaks down in inches with a leading zero for sizes under an inch such as: 012=0.125″, 025=0.25″, 037=0.375″, 050=0.500″, 075=0.75″, 100=1.00″, 150=1.50″, 200=2.00″, and 300=3.00″
What is HTD timing belt?
HTD® Timing Belts feature a curvilinear tooth profile, which is a design advancement over the standard trapezoidal shaped belts. The curvilinear profile allows the belts to have a much larger contact area with the pulley, which improve performance.
How old is Sal Bando?
77 years (February 13, 1944)
Sal Bando/Age
Who did Sal Bando play for?
Milwaukee Brewers1977 – 1981
Oakland Athletics1966 – 1976
Sal Bando/All teams
How do you read a serpentine belt number?
Read the number that follows the letter. This number represents the length of the inside of the fan belt (as opposed to the number in the standard automotive belt, which represents the outside circumference). For example, if the number is 46, that means the inside circumference of the belt is 46 inches.
How long should timing belt last?
Depending on what schedule you may read, including information distributed by the manufacturers themselves, the average life span of a timing belt is between 60,000 and 105,000 miles or after 7 to 10 years regardless of mileage.
How do you check a timing belt?
Look for any contaminants that could eat away at the belt or cause it to slip. Also, look for cracks in the belt. If the belt has many cracks in it, this can indicate that the belt is old or has dried out. Next, inspect the underside of the belt and verify that all the teeth are in good condition.
What is HTD pulley?
HTD Standard timing pulleys are the basic type of HTD pulleys. They are made of steel or gray cast iron and they are designed as unbored or with a pilot bore. The pulleys are supplied as a semi-finished product and the bore must be modified before mounting the pulleys on the shafts.