How do you clear a DSC alarm problem?

How do you clear a DSC alarm problem?

How to Reset a DSC Alarm After the Power Has Been Off

1. Press and hold the “RESET” key for 2 seconds.
2. Press the buttons “*72” if the alarm does not reset after pressing the RESET button.
3. Check the sensors if it still does not turn off.

How do I know if I have DSC problems?

How to Acknowledge and Check a Trouble Condition DSC Power Series PC1616, PC1832 and PC1864

1. Press the # key to silence the beeping that accompanies the trouble.
2. Should the Trouble Condition light be active on your system, Press * 2 to enter the Trouble Condition Menu.
3. The Trouble Light will flash.

How do I reset my DSC yellow light?

Press the ‘7’ key and you will receive a number corresponding to the affected zone. The indicated zone is reading a low battery condition and needs a replacement battery. Replace the battery in the contact and the condition will clear.

What does the yellow triangle mean on my alarm system?

trouble condition
The yellow triangle means that your alarm system is experiencing a trouble condition. This could be caused by a number of different possible factors, such as a low battery, an activated tamper or communication problems.

How do I reset DSC alarm to factory defaults?

You can reset a DSC Impassa to factory defaults by first unplugging the AC transformer and disconnecting the battery to cut power. Then connect a jumper between inputs IO1 and IO2. Power up the panel, wait 10 seconds and power down. Then disconnect the jumper, and power the system back on.

How do I reset my DSC fire alarm?

To cancel fire alarm press [#] within 30 seconds of alarm, otherwise the signal will be sent to the Central Station. To reset the smoke detectors press [*] then hold down the [4] for several seconds. A trouble will be indicated by the Trouble light which will remain on until the trouble condition is cleared.

How do I view Trouble conditions on the pc1500/pc1550?

Viewing Trouble Conditions The PC1500/PC1550 continuously monitors a number of possible trouble conditions. If one of these trouble conditions occur, the keypad will beep twice every 10 seconds and the keypad “Trouble” indicator will light. Pressing any key on the keypad will silence the sounder but the “Trouble”…

Is there a manual for a pc1550 security system?

The entire manual should be carefully read. General System Operation Your security system is made up of a PC1500 or PC1550 control panel, one or more PC1500RK keypads and various sensors and detectors. The control panel will be mounted out of the way in a utility closet or in a basement.

What are the components of a DSc security system?

GENERAL SYSTEM OPERATIONS Your security system is made up of a DSC PC1500 or PC1550 control panel, one or more PC1500RK keypads, and various detectors and sensors. The control panel will be mounted out of the way in a utility room or basement. The metal cabinet contains the system electronics, fuses and standby battery.

Does the PC1500 use cookies?

PC1500 – PC1500 Security Products | DSC This site uses cookies to offer you a better browsing experience. By continue to navigate through this site or by clicking Approve, you consent to the use of cookies on your device as described in our. privacy notice. APPROVE