What is a code 1 sail?
Code 1 is a light air reaching sail, where the apparent wind angles at low speeds has a significant effect to create angles of less than 90 degrees. Code 2 is a medium air running sail, used for apparent wind angles over 90 degrees. Code 3 is a medium air reaching sail, used for apparent wind angles near 90 degrees.
What is the difference between a code 0 and a gennaker?
A Code 0, for example, is a gennaker, but a Code 0 is a racing sail, while a gennaker is usually considered a cruising sail. Ultimately, there are four or five different types of asymmetrical spinnakers, with each sail designed for a specific wind angle range. As such it will also be similar to a reaching gennaker.
What is a Code 5 sail?
Code : Sail dedicated to breezy conditions, relatively deep, heavily built.
How much faster does a Code 0 sail make sailboat go?
Cruising Code Zero for non-overlapping boats Apparent wind speed: 1-16 knots. Approximately 60% of the sail area of a full-size spinnaker and about twice the size of a non-overlapping genoa. Use with a “top down” roller/furler with a torsion rope sewn into the sail. Made with Code Zero laminate cloth.
What does code 0 mean in a hospital?
CODE ZERO. Remaining in area may be hazardous to life, health or safety. Administrator will notify all in area of need to evacuate.
What is a gennaker sail?
A gennaker is a sail that was developed around 1990. Used when sailing downwind, it is a cross between a genoa and a spinnaker. It is not symmetric like a true spinnaker but is asymmetric like a genoa, but the gennaker is not attached to the forestay like a jib or genoa.
What is a code 0 for police?
Here is a fully comprehensive list of Association of Public-Safety Communications Officials (APCO) 10 codes. Note: 10 codes can vary greatly from department to department….Code.
| Code | Meaning |
|---|---|
| 10-0 | Use Caution |
| 10-1 | Signal Weak |
| 10-2 | Signal Good |
| 10-3 | Stop Transmitting |
What is Code 2 sail?
The Code 2 sails are made to be used with the apparent wind generally between 90 degrees and as deep as your boat can sail efficiently and in 7 knots of wind to 20 knot of true wind. This would be considered your “All Purpose” spinnaker.
What is a code zero on a sail?
A Code Zero is tacked ahead of the genoa – either on a sprit or on the anchor’s bow roller. Furling sails require high tension to furl effectively, so if the sail sets on a sprit it must be well supported or very robust. Obviously the roller drum must clear the other genoa’s furler drum. The head swivel attaches to the spinnaker halyard.
What are the different types of code sails?
What Is A Code Sail? 1 Code Zero Asymmetric Spinnaker – Mid Girth (SMG) >75%. 2 Code 55 + 65 (SMG 51%-74%) A Code 55 has a 55% SMG while a Code 65 features a 65% SMG. 3 Free Flying Genoa (SMG<50%) Not all free-flying furling sails are considered Code Sails. 4 A3 (Hybrid) Asymmetric Spinnaker – Mid Girth (SMG) 75-85%.
Are CoDecode sails banned?
Code Sails with mid-girth between 50% and 75% are highly efficient and versatile sails. However, these sails are sometimes treated unfavorably (if not outright banned) by certain rating rules.
What is the difference between a code 55 and code 65 sail?
For more information, please read the Helix Blue Paper. A Code 55 has a 55% SMG while a Code 65 features a 65% SMG. (SMG is mid-girth as a percentage of foot length). Code Sails with mid-girth between 50% and 75% are highly efficient and versatile sails.