Can you mount a Vizio 32 TV?
Most VIZIO HDTVs can be wall mounted. The holes for the wall mount screws are in the back of the TV.
How do I know what Wall Mount fits my TV?
To find your VESA size, just measure the distance between the holes (center to center), horizontally and vertically. Your goal is to choose a mount that is the same as, or larger than, your TV’s VESA pattern. Manufacturers use millimeters to designate size, so you can do the math to convert (1” = 25.4mm).
What are VESA patterns?
A VESA pattern refers to the configuration of the four mounting holes on the back of a flat panel TV or computer monitor. For example, in a 100 x 100 mm VESA pattern, the screw holes are arranged in a square 100 mm apart. Before you select a display mount, check the back of your display for the VESA mounting holes.
How do I know what size my TV mount will hold?
To determine the VESA size, you’ll need to measure the distance (in millimeters) between the four holes on your TV—first horizontally and then vertically. Common VESA and TV sizes include: 200 x 200 for up to 32 inch TVs, 400 x 400 for up to 60 inch TVs, and 600 x 400 for large screens 70 to 84 inch TVs.
How do you mount a Vizio TV?
Locate a spot on the wall where you want to hang the Vizio flat-screen television. Use a stud finder to find two studs in the area. The studs should be between 12 and 16 inches apart. Once you locate the studs, use a small finishing nail to poke holes through the drywall into each stud until you locate the center.
What sizes do Vizio TVs come in?
Television sets. Vizio unveiled a new range of televisions including Vizio’s M line with 65-inch screens; ultra-wide televisions with 50-, 58-, and 71-inch screen sizes; two all-in-one desktop computers (24-inch and 27-inch); three notebooks (one 14-inch and two 15-inch); and a 10-inch tablet at the 2012 International Consumer Electronics Show .
What is a TV wall mount?
A wall mount is a steel bracket used to attach a flat panel TV or computer display to a wall. In order to attach the bracket to the display, pre-existing screw holes must be present on the rear of the monitor or television.