What does uL mean on my Cabrio washer?
Unbalanced load
uL. (none) Unbalanced load. uL is displayed when the machine/motor control detects an off-balance load and remains on while the washer runs a mini-cycle to rebalance the load.
How do you clear the fault code on a Whirlpool Cabrio?
First press PAUSE/CANCEL once to clear the Fault code from the Cabrio display. If code appears again put it through an automatic diagnostic cycle while you enjoy a nice soothing cup of tea. (Watch The Cabrio Diagnostics Video); This will reveal any stored Fault codes.
How do I fix an unbalanced washing machine?
If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it. You may need to open the front access panel to loosen the lock nuts that control the legs.
Why does my Whirlpool washer not spin all the water out?
If your washer will not spin out all water and clothes are still wet, the drain pump might be clogged with debris or possibly faulty. There could be a foreign object that is stuck in the pump and inside the drain hose. Check these areas and remove anything that may be clogging the draining system on your washer.
What does UL mean on electrical equipment?
Underwriter Laboratories
UL stands for Underwriter Laboratories, a third-party certification company that’s been around for over a century.
Why does my washing machine keep going off balance?
Laundry caught below the tub or between the agitator and the inner tub can cause the washer to operate off balance with every load. The problem can be anything: a penny that worked its way out of a pocket, a button that fell off a shirt or a wayward sock or other article of clothing.
What does ul code mean on a whirlpool washer?
Hello, The UL code means a unbalanced load,sometimes it can as easy as leveling the washer,or a odd load such a towels all being on one side of tub and thinner less water retaining sheets being on the other side.
What does F1 code on Whirlpool Cabrio washer mean?
The F1 error code on a Whirpool Cabrio washer means that water level pressure switch that is built into the computer board on those models is sending an incorrect signal to the board.
What are the error codes for a whirlpool washer?
A: Error codes for a washing machine, such as the Whirlpool Duet front loading automatic unit, can contain a F followed by two digits like F07, F09 and F10.
What does LF mean on the Whirlpool Cabrio washing machine?
Whirlpool Cabrio washer with error code LF. This error means Long Fill (LF). It basically means that if the machine has not filled after 10 minutes then it goes into this error condition. First thing to do is make sure the taps are turned on.