What is a toggle bolt used for?
Toggle Bolts, also known as Molly Bolts or Butterfly Anchors, are light-duty, hollow wall anchors specifically designed for use in hollow block, drywall, and other hollow base materials. This type of bolt is a two-part fastener system consisting of a spring wing toggle and a machine screw.
What is the difference between a molly bolt and a toggle bolt?
Note: Molly bolts are suitable for use in ceilings and best for lightweight to medium weight objects like smoke alarms, picture frames, television stands, and more. Toggle bolts push through a predrilled hole and the winged head snaps open on the other side to secure the bolt to the wall.
How much weight do snap toggles hold?
TOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size; Holds 80 pounds Each in 1/2-in Drywall by TOGGLER (12 Pack)
How much weight can 4 toggle bolts hold?
Toggle bolts at a glance: Maximum holding power for metal toggles is 100 pounds, depending on size; plastic wing toggles have a holding power up to 20 pounds, depending on size.
Why are they called molly bolts?
A molly or molly bolt (often misspelled moly) is a type of screw fastener that fastens objects to plaster or gypsum board hollow walls by providing an anchor to be lodged inside a hole and expanded once in position. The name Molly was formerly trademarked but is now often used in generic reference.
Can toggle bolts hold a ceiling fan?
The wings of the toggle bolt open when the bolt is thread into them. The wings press against the backside of a thin wall, such as drywall, providing support to the object you are hanging. Some common uses for toggle bolts include: Hanging ceiling fans.
How do I install a toggle bolt?
Insert the bracket in the bolt and thread the toggle onto its end. Fold the toggle back, and insert it through the wall hole until you feel the wings have opened on the other side of the wall. Pull the bolt back until the wings catch the wall. They should not be twirling while you are fixing the bolt.
How much weight can toggle bolts hold from ceiling?
Toggle bolts will hold 15 or 20 pounds, depending upon size, and you can often use two or more to increase holding capacity. To use a toggle bolt, you drill a hole in the wall. Then thread the wings off the bolt, slip the bolt through the object you wish to hang.
Can you use toggle bolts in drywall?
This method is the easiest. It is also for only very light objects. This method also depends on the thickness of the drywall. The thicker the drywall the more support it will allow. Putting your toggle bolt on the drywall is simple. You have to drill a hole where you want your object to hang.
How much weight can a toggle bolt support?
Toggle bolts can support up to 50 pounds when installed in a wooden ceiling. They can support considerably less weight in a drywall ceiling, because drywall is more likely to break under a heavy load.