How do I activate a device on DStv now?

How do I activate a device on DStv now?

Go online to now.dstv.com and create an account (should you not have one) by choosing a username and password. Once the account has been created, download the dstv now app and log in using the details when creating your account. The DStv Now app can be installed on any smart device and connect to 4 devices.

Can you activate a DStv decoder online?

You can create a Connect account by clicking “Register” in the top right of the DStv.co.za website and following the prompts in order to complete your registration.

How do I set up a new DStv?

Running the installation wizard on the HD decoder

1. Press the blue “DStv button”
2. Use the right arrow to go to “Settings”
3. Scroll down to “Satellite Settings”
4. Then choose “Home Network”
5. Select “Launch Installation Wizard” then press “OK” on the remote.
6. Choose the satellite that matches your country.

Can’t register device on DStv now?

When I go to manage devises with the current settings, it tells me that “This device is not registered for DStv Now”. Please login to with the previous user’s credentials, go to DStv Now settings, select manage devices and remove the device. Logout of the App and login with your credentials.

How do I connect DStv to another device?

Go online to now.dstv.com or download the DStv Now app. Follow the prompts to create a username and password, and ta-dah, you can watch DStv on any device.

How long does it take to activate DStv?

Your services should have been reconnected after 15 minutes if you made an internet bank transfer, an ATM payment or direct deposit at any Absa branch. It could take a little bit longer for the payment to reflect on our system. If this hasn’t happened, you can reconnect your services online or via our mobile app.

How do I set up a new decoder?

Connecting Explora Decoder using a Smart LNB

1. Mount and correctly align the satellite dish.
2. Connect the RG6 cable to the unicable port on the Smart LNB.
3. Connect the RG6 cable to your decoder.
4. Run the installation wizard.
5. Contact Multichoice to activate the decoder.

How do I connect my dish to decoder?

Connect the cable from the satellite dish directly to the LNB input on the back of the decoder. Connect the cable from the satellite dish directly to the LNB input on the back of the decoder. Connect either cable from the satellite dish directly to the LNB input on the back of the decoder.

How do I pair my DStv decoder with my smart card?

To pair smart cards with decoders:

1. On the Provisioning module, click Setup Pairing.
2. Retrieve details of the customer.
3. To do a pairing, click the Add link in Pairing Details table.
4. Select the type of smart card from SmartCard Code drop down.
5. Select the type of decoder from Decoder Code drop down.

How do I connect DStv to another TV?

Re: How to connect two TV sets to a 4U DSTV decoder in different rooms. Wire from the dish goes into decoder as per normal. Connect the tv closest to the decoder via the hdmi / av cables to that tv. Take the out cable at the back of the decoder to the other tv, no splitter needed.

How to activate & create account for your new DSTV decoder?

How To Activate & Create Account For Your New DStv Decoder. 1 1. Make sure you have checked your DStv smart card or IUC number. 2 2. Write down the decoder serial number. 3 3. Now, switch on your DStv decoder. 4 4. Scan your DStv decoder to get all the channels. 5 5. After scanning your DStv Digibox, you will see channel 100 working.

How to set up FTA channel for DStv HD Decoder?

If you are using a HD decoder, see FTA channel setup for DStv HD Decoder. STEP 1 On your Remote Control just go to Menuby pressing the Blue button. STEP 2 Then select Settingsand go to Satellite Settings. STEP 3 On satellite settings, there is Home Networkand Additional Network.

What decoder do I need for DStv HD on IS20?

A DStv HD decoder with MPEG-4 capabilities, installed on is20 satellite. You will need a decoder with MPEG-4 capabilities for free to air channels. If you are not using an MPEG-4 capable decoder, you won’t receive audio on most channels. This is why many people complain of sound after setting up free-to-air channels.

How do I change the number of DStv networks?

Go to Menu by pressing the Blue “DStv” button. Then select Settings and go to Satellite Settings. Select Additional Networks. On Additional Networks, you will find Networks numbered from 1 to 5. Do not change any frequencies on Network #1.