How do I reset my Ferroli Optimax HE 31c?
Press heating + and p02 appears. Press hot water + and 0 codes appear. Then press up or down on heating + or – to get o1 . Then press reset for ten seconds.
What does A01 mean on a Ferroli boiler?
A01. No burner ignition, No gas or ignition , issue with detection electrode, faulty gas valve or insufficient gas supply pressure.
What pressure should my ferroli boiler be?
between 1.0 and 2.0
Your boiler gauge should show that the boiler pressure is between 1.0 and 2.0. If the pressure drops below 1.0, then you’ll need to repressurise it.
What does the ECO button do on my boiler?
What is eco-mode? This function will switch off your preheat settings, which means it may take slightly longer for hot water to come through the tap. If it is not selected, the preheat is on and there will be a “quicker response to a hot water demand”, say Worcester.
What does F1 mean on a Ferroli boiler?
When the unit is low on water pressure, the Ideal boiler F1 error code is displayed.
Why does my ferroli boiler keep losing pressure?
Some Ferroli boilers will lockout if the pressure gets too low. Leaks are the most common cause of a pressure loss fault. Most of the time this will be leaking from radiator valves, or valves on towel rails. However, the leak can sometimes come from the auto air vent in the boiler, or expansion vessel.
What happens when the boiler pressure is too high?
If the boiler pressure is too high, there’s an increased chance of leaks developing in the system. But if boiler pressure is too low, the system won’t work as well. So keeping the correct boiler pressure is important to make sure that your system heats your home efficiently.
Why choose the Ferroli Optimax he 31 C?
Dear Customer, Thank you for choosing the OPTIMAX HE 31 C , a FERROLI wall-mounted boiler of the latest generation, featuring advanced design and cutting-edge technology. OPTIMAX HE 31 C is a high-efficiency condensing pre-mix appliance for heating and hot water pro- duction with extremely low emissions, running on natural gas or LPG.
How do I Turn Off my Optimax he 31 C boiler?
OPTIMAX HE 31 C Turning off Press the (part. 7 – fig. 1) for 5 seconds. When the boiler is turned off with this key, the p.c.b is still powered, heating operation is disabled and the display is off however the frost protection will still be active. To totally isolate close the gas cock ahead of the boiler and disconnect electrical power.
What does the B mean on Ferroli products?
•”Ferroli declare that no substances harmful to health are contained in the appliance or used during the appliance manufacture”. BThis symbol indicates “Caution”and is placed next to all safety warnings. Strictly follow these instructions in order to avoid danger and damage to persons, animals and things.