What is the warranty on a Schlage lock?
Schlage stands behind its products and will continue to do so with a limited lifetime mechanical and finish warranty, a three-year limited electronics warranty and dedicated resources, customer support and innovation.
Why did my Schlage lock stop working?
As mentioned, your Schlage keypad lock may not function correctly if the batteries are weak. So check that the batteries are still active. If not, replace them with new batteries and ensure they’re properly placed. Do not mix old batteries with new ones, replace them all for the best performance.
How long does a Schlage lock last?
The Schlage Touch is powered by a 9V battery and because it is a standard electronic lock, the battery life will last two years with a low-battery warning that will alert you long before the battery is completely drained.
How do you tell which Schlage lock I have?
Look on your Schlage key. It should have 5 pin numbers stamped on the the back of the key with the letter C below the numbers.
How do you clean oil rubbed bronze outside door hardware?
To clean the hardware, use a mild liquid soap (for example, Dawn original blue dishwashing soap) in warm water. With a soft cloth wipe the surfaces gently. Then use fresh water to rinse the hardware, and a clean dry soft cloth to blot it dry. This will remove most surface impurities like salt or dirt.
How do you open a Schlage lock with a dead battery and no key?
How do you unlock a Schlage Control lock that has a dead battery?
- Touch a new high-quality alkaline 9-volt battery to the contacts below the bolt throw.
- Wait for 1 red light and then 3 green lights with 3 beeps.
- Present a valid credential.
- Rotate the bolt throw away from the door edge.
- Replace the batteries.
Why does my Schlage lock not lock?
Ensure the Turn Lock Feature is Enabled Though the Turn Lock feature is enabled by default, you may have mistakenly disabled it. So you want to ensure the feature is enabled and then try to lock the deadbolt again without entering a User Code to see if it works.
Do smart locks run out of battery?
Smart locks batteries usually last between 1 month to 2 years, depending on the lock’s brand, connectivity, and the type of batteries. So if your smart lock runs on alkaline batteries, replacing them with lithium batteries can help boost its battery life.
How do I troubleshoot my Schlage keypad lock?
How to Troubleshoot a Schlage Keypad Lock That Won’t Unlock
- Ensure You’re Entering a Valid User Code.
- Check Whether Lock Override Is Enabled.
- Check That Vacation Mode Is Not Enabled.
- Unlock Your Door With a Physical Key.
- Check That Your Lock Is Correctly Installed.
- Replace Batteries.
- Restore Factory Settings to Fix Any Glitch.
Where are Schlage made?
American
Schlage (pronounced /ˈʃleɪɡ/ SHLAYG) is an American lock manufacturer founded in 1920 by Walter Schlage….Schlage.
| Industry | Security hardware |
|---|---|
| Headquarters | Colorado Springs, Colorado, U.S. (1997–present) San Francisco, California, U.S. (1920–1997) |
Why won’t my Schlage door lock lock work through the keypad?
Your lock should come with a keyhole and physical keys, so try to lock it with a physical key to see if it works. If it locks via a physical key but still won’t lock through the keypad, then you’ll need to contact Schlage Customer Support for help.
Why choose Schlage Smart locks?
A modern essential. Our top-rated smart lock features over 100 years of expertise and the latest smart home technology. Trust your home to Schlage. For more than a century, we’ve provided peace of mind to millions of homes.
How to replace the battery in a Schlage Lock?
Some simple steps are needed to follow for replacing the batteries of your Schlage Lock: Remove the screws and the inside cover of the lock using a screwdriver. Take out the old batteries and lightly clean the inside of the battery holder using any piece of cloth or tissue. Take the new pair of batteries and install them carefully.
How do I Fix my Schlage encode that is not working correctly?
If your Schlage Encode is not functioning correctly, it must be jammed somewhere. You can take it to any professional, or you can try to reset it. Another thing you can do is disassemble the whole lock and try to fix the problem. Here is a YouTube video explaining exactly what to do to unjam the lock.