What is cisco Enable password?
To set a local password to control access to various privilege levels, use the enable password command in global configuration mode. Use the no form of this command to remove the password requirement.
What is the difference between enable password and enable secret?
The main difference between enable and enable secret is encryption. With enable, the password that you give is stored in a plain text format and is not encrypted. With enable secret password, the password is actually encrypted with MD5. In the simplest sense, enable secret is the more secure way.
What level of access does the enable password get the user to?
The enable, or privileged, password has an additional level of encryption that should always be used. The privileged-level password should always use the MD5 encryption scheme. This type of encryption cannot be reversed.
What is the enable secret command for?
Sets a secret to control access to certain types of commands. The first time you define a secret, you must enter it in plain text. To view its encrypted form, use the show config display. To redefine the secret at a later date, you can enter the secret in its encrypted form.
Why is it not necessary to use the enable password password command?
So why don’t we use the enable password command in most cases? The answer is simple: it’s an outdated format that anyone can have ample opportunity to take advantage of.
What is enable secret password?
# enable secret – it will enables a password and password encryption that based on the md5 hashing algorithm. This is is a most recommended command to supply while enabling a password to any cisco network devices.
Which of the following commands sets the privileged mode password to Cisco and encrypts the password?
The _enable secret [password] command enables an encrypted password and overrides the enable password if it is set. The _enable password [password] command adds a plain text password to the privileged mode.
Which command defines the password that you had to enter to access privileged mode?
Which command defines the password that you had to enter to access privileged mode? B (enable secret) . If both commands are configured, IOS accepts only the password as configured in the enable secret command.
What is the command to enable user with password?
If you haven’t already done so, run the sudo addsftpuser command. Select N and then press enter when prompted to create a new key. $ sudo passwd > Changing password for user . New password: Retype new password: passwd: all authentication tokens updated successfully.
How do you reset a Cisco router password?
To do this, press and hold the Reset button for 10 seconds. NOTE: Resetting your router to its default factory settings will also reset your router’s password. The router’s default password is “admin” as for the username, just leave the field blank.
How do I Reset my Cisco router?
To reset your Cisco router to its factory default configuration using the Reset button: First switch on router. Then, Find the Reset button on the router (Generally back side of the router). Press and hold the Reset button with sensitive material while you power on the router. After that Release the Reset button after 10 to 15 seconds.
How to find Cisco password?
Step 1: From the Start screen,swipe in from the right edge of the screen,and then tap Settings. (If you’re using a mouse,point to the upper-right
What is the password for Cisco routers?
Most routers and switches by Cisco have default passwords of admin or cisco, and default IP addresses of 192.168.1.1 or 192.168.1.254.