How do I unblock port 9000?

How do I unblock port 9000?

Enable a port range in advance

1. Click Advanced settings in the left column of the Windows Firewall window.
2. Click Inbound Rules in the left column.
3. Click New Rules in the right column.
4. Select Port and click next.
5. Select TCP and enter 8000, 8001, 8002, 8003, 9000, 80, 443 in the Specific local ports field.
6. Click Next.

Is it safe to open port 9000?

No, you do not need to open port 9000 as this is a virtual port number. The port number 7163 will be used each time SSA is involved in the communication,that is for communication with WCC, Client utilities, APIs and SDK.

How do I allow a port in my firewall?

How to open a port for incoming traffic in Windows Firewall

1. Right-click the Start button.
2. Click Search.
3. Type Windows Firewall.
4. Click Windows Firewall.
5. Click Advanced settings.
6. Click Inbound Rules in the left frame of the window.
7. Click New Rule… in the right frame of the window.
8. Click Port.

How do I unblock ports on my router?

Head over to your router’s settings. Enter your credentials (device username and password). Look around for the Port Forwarding tab. On the Port Forwarding tab, enter your device’s name and open your preferred port—for example, type 8080 to open port 8080.

What happens if Port 10080 is in use?

If port 10080 is in use, the system will try 10081, 10082, etc. until 10100. If port 10080 is open on both the network where the network drive (MyCloud) is connected as well as on the network where the computer is currently connected, the communication becomes direct peer to peer.

What is Port 9002 error 2?

Error 2: Port number 9002 specified for Internal Communication Port Range is blocked. Thanks sharepoint-enterpriseworkflowiis Share Improve this question Follow edited Aug 19 ’13 at 6:55 PeterX 1,02022 gold badges1818 silver badges3838 bronze badges asked Apr 26 ’13 at 20:25 ArmandArmand 13111 gold badge11 silver badge33 bronze badges

Is there port blocking / filtering beyond one’s own router?

In the end, we confirmed (as it was already understood), that there is apparently NO port blocking / filtering going on beyond one’s own router (from the ONT upstream). So, my apologies to the community for the bad assumptions in my previous post.

Why do some ports show up as closed/stealth?

Keep in mind that ports will show as closed/stealth even if there is no firewall present, if there is not an application listening for traffic sent to those ports.