What sizes do paneling come in?

What sizes do paneling come in?

In general, plywood and most hardwood paneling is 1/2- or 3/4-inch thick. Other thickness are slightly different, measuring 11/16, 9/16 or 5/8 inch thick. MDF is usually the thinnest paneling available, about 1/4-inch thick. Thicker hardwood panelings that are more than 1 inch thick are also available.

What is thin wood paneling called?

Beadboard consists of narrow planks in rows lined up against each other. In between the wood planks there is a ridge or indentation called a “bead.” Beadboard is commonly used as wainscoting, installed vertically with a baseboard and is capped by a molding. Beadboard can also be found as a ceiling application.

What wood is best for Panelling?

Wood is the traditional material used for wall panels but if you’re going for a more modern painted finish, MDF is much better value and is actually a very stable board. In high-moisture environments, like bathrooms, it’s essential to use Moisture Resistant (MR) MDF.

What thickness should Panelling be?

When it comes to purchasing sheets of MDF, firstly you’ll need to select a thickness. For wall panelling we would recommend using 6mm or 9mm MDF depending on how pronounced you want the panels. The depth will allow the pattern to protrude from the wall just enough to give it texture.

What is half wall paneling called?

Wainscoting is any style of wood paneling that is on the lower one-half to one-third of a wall, usually around the entire room perimeter.

How wide should Panelling be?

Slat – MDF Slat Wall Panelling – Usually made up of 100mm – 120mm wide slats. The strips are then placed next to each other vertically spanning the wall. They are usually fixed on the lower portion of the wall and capped off with a dado rail, but they can be applied from floor to ceiling.

What do you put behind paneling?

Panels less than 1/4″ thick need a solid backing–such as a level and flat plasterboard wall behind them for support. Panels 1/4″ and thicker can be installed directly over even framing members–studs or furring strips (check building codes for your area).

What are the dimensions of wall paneling?

Paneling is 48″ wide by 96″ high. In application, paneling is frequently cut to 32″ or 48″ high wainscoting. States currently offers forty individual wall paneling products.

What is wood paneling used for?

Primarily designed for residential applications, wood wall paneling is also popular in cabins and recreational vehicles, as well as in commercial buildings like offices, churches, restaurants and retail stores. Wall paneling is available in natural, finished or unfinished wood veneers.

What is wallwall paneling made of?

Wall paneling is available in natural, finished or unfinished wood veneers. Finished panels utilize our proprietary NOVA ultraviolet-cured coatings, making them as durable and resilient as they are beautiful. Paneling is 48″ wide by 96″ high.

How many types of wall paneling does States offer?

States currently offers forty individual wall paneling products. Selected panels may be flat, but most have a decorative pattern grooved or beaded into the surface. More detailed information is available in our downloadable Wall Paneling specification sheet.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top