How can I make my Fritz box faster?

How can I make my Fritz box faster?

1 Disabling manual connection rate in the FRITZ!Box

1. In the FRITZ!Box user interface, click “Contents” on the bottom left of the page and then on “FRITZ!Box Support” at the bottom.
2. Disable the option “Enable manual connection rate” in the section “DSL Line Speed”.
3. Click “Apply setting” to save the settings.

Why is my Fritz box so slow?

The internet connection on computers, smartphones, and other devices connected to the FRITZ!Box is very slow. As a result, web pages load slowly, it takes a long time to download files, and video streams are not played correctly or are interrupted, for example.

How do I setup my Fritz Box 7360?

Basic and Internet configuration

1. Step 1 – Opening the web interface. Open your web browser (Internet Explorer, Firefox, Google Chrome,…)
2. Step 2 – Language choice.
3. Step 3 – Regional setting.
4. Step 4 – Reboot.
5. Step 5 – Set the Administrator password.
6. Step 6 – Welcome screen.
7. Step 7 – Leaving the wizard.
8. Step 8 – Wizards.

Why is my Telecom WiFi not working?

If your wireless connection suddenly stops working, before trying anything else, restart your router. Here’s the process: Unplug or power off your router. Wait 2-5 minutes before plugging it back in.

Does the FRITZ®Box 7360 V1 support VDSL?

The chipset in the FRITZ!Box 7360 v1 supports vectoring, which means this hardware is capable of providing high speed VDSL.

How do I get the firmware for the Fritz 7360 V1?

The required firmware can be extracted from the factory FRITZ!Box 7360 v1 image file (as its about the same chipset, it’s also possible to get this firmware file e.g. from the FRITZ!Box 7490 image). Steps for how to get the firmware file with Freetz and use it on OpenWrt:

What devices can I connect to the FRITZ Box wirelessly?

WLAN Base Station for Wireless Connections Computers and other network devices that support WLAN can be connected wirelessly with the FRITZ!Box. If no WLAN de- vice is integrated in your computer, you can install an external WLAN adapter like a FRITZ!WLAN USB Stick by AVM (see also AVM Products for the FRITZ!Box from page 146 ).

How to upgrade the firmware of the avm_fritz7360sl-squashfs?

1. Download the firmware file avm_fritz7360sl-squashfs-sysupgrade.bin: 2. Use FTP in order to enter the bootloader: After the connection was successfully established (see hints above) use as Name: adam2 and Password: adam2 3. Set type: 4. Set passive mode: 5. Set media: 6. Use the downloaded firmware: