How do I change the sound settings on my PS3?

How do I change the sound settings on my PS3?

Select (Settings) > (Sound Settings). Select [Audio Output Settings]. Select the input connector on the audio device. Channel numbers and audio formats that are supported vary depending on the connector in use.

How do I connect my PS3 to my home theater system?

plug the PS3 into the Home theater receiver, and the cable box if you have one, and then run an HDMI cable fro the home theater receiver output into the TV. You would select the PS3 or cable box with the home theater remote and it would switch the correct inputs and route them to the home theater output.

What is audio Multi Output in PS3?

Adjust this setting to output audio through the HDMI OUT connector, the DIGITAL OUT (OPTICAL) connector, and the AV MULTI OUT connector simultaneously. On. Enable the multi-output feature.

How do I connect my 5.1 speakers to my PS3?

Connect the PS3 to the computer using an optical digital cable.

1. Attach one end of the cable to the digital optical output jack on the back of your PS3.
2. Connect the other end of the cable to the corresponding input jack on your computer speakers for the optimal PlayStation 3 audio experience.

Does PS3 have surround sound?

Sony’s PS3 offers a fiberoptic digital output so you can get 5.1 channel DTS or Dolby Digital sound without an HDMI cable.

How do I connect external speakers to my PS3?

Does the PS3 have surround sound?

How do I output audio to a PS3 via HDMI cable?

When using an HDMI cable, only [Linear PCM 2 Ch.] audio will be output from PlayStation®2 and PlayStation® format software. To output Dolby Digital or DTS® audio, you must connect the PS3™ system and the audio device using a digital optical cable and switch to [Optical Digital] under

What is the best audio format for the PS3?

You can still take advantage of lossless audio by switching over to Linear PCM rather than Bitstream. This is the ideal setting for the older (fat) PlayStation 3 models or basically for anyone that wants a granular level of control over audio formats.

How do I know what audio codec my PS3 is using?

The simplest way to figure all of this out is to set your PS3 to Bitstream, pop in a Blu-ray disc, choose a Dolby TrueHD or DTS-HD Master Audio audio track in the Blu-ray disc menu and watch what codec pops up on the front of your receiver when the video starts up.

How do I output Dolby Digital or DTS® audio to my PS3™ system?

To output Dolby Digital or DTS® audio, you must connect the PS3™ system and the audio device using a digital optical cable and switch to [Optical Digital] under [Audio Output Settings].