What engine did the 1995 ZR1 have?
Engines
| Engine | Model Year | Power |
|---|---|---|
| 5.7 L (350 cu in) LT5 V8 | 1993–1995 (ZR1) | 405 hp (302 kW) |
| 5.7 L (350 cu in) LT1 V8 | 1992 | 300 hp (224 kW) |
| 1993–1995 | 300 hp (224 kW) | |
| 1996 | 300 hp (224 kW) |
What engine does a 1995 Corvette have?
5.7 L V8
1995 Chevrolet Corvette/Engine
How much is a 1995 Corvette ZR1 worth?
Detailing
| Vehicle: | 1995 Chevrolet Corvette ZR-1 |
|---|---|
| Number Produced: | 6,922 |
| Original List Price: | $68,043 |
| SCM Valuation: | $31,000 |
| Tune Up Cost: | $500 (estimated) |
Who made the C4 ZR1 engine?
Mercury Marine
Available now is the first production LT5 V8 engine that was originally produced by Mercury Marine for use in the C4 Corvette ZR-1. Seriously, engine unit number “0000” is available for sale through Automation Classics in Troy, New York.
How fast will a 1995 Corvette go?
| 0-60 mph | 5.6-6.3 seconds |
|---|---|
| ¼ mile elapsed time | 14.1-14.8 seconds |
| ¼ mile mph | 103-95 mph |
| Top speed | 154-152 mph |
What was the horsepower of a 1995 Corvette?
300 to 405 hp
1995 Chevrolet Corvette/Horsepower
How much horsepower does a 1995 Corvette have?
What is a LT5 engine?
The LT5 is an overhead valve (OHV) eight-cylinder, supercharged gasoline engine from General Motors. The engine is similar to the 6.2-liter LT4 V8 found in the C7 Corvette Z06 and sixth-gen Camaro ZL1, but with a larger supercharger, larger throttle body, stronger crankshaft and a new dual-fuel injection system.
How much HP does a 1995 Corvette have?
How much horsepower did a 1995 Corvette have?
Horsepower (SAE net): 405 at 5800 rpm. Torque (SAE net): 385 at 5200 rpm. Redline: 7200 rpm. Compression ratio: 11.0:1.
How many horsepower does a 1995 Corvette ZR1 have?
Schroeder Motors is Proud to Offer This Rare 1995 Chevrolet Corvette ZR1 No. 366 0f 448 Made in 1995 Only 59,000 Origanal Miles 405 Horsepower LT-5 V8 Engine 6 Speed Manual Transmission Selective Ride Control Black Exterior Black
How much horsepower does a Chevy ZR-1 engine have?
The completed engine had a 14-minute dyno run for initial startup; break in schedules, and a full-throttle run to establish power rating. The new engine measured 350 cubic-inches, and from 1990 to 1992 was rated at 375-horsepower. For 1993 to 1995 ZR-1s, engineers hot-rodded the LT5, upping the power to 405-horsepower.
How many ZR-1’s were made in 1993?
We’re not sure how this engine escaped its fate of being installed into a ZR-1 at Bowling Green as Chevrolet was locked into a production schedule to produce 448 ZR-1s per year for 1993, 1994 and 1995. But Bowling Green’s loss could be your gain!
What was the first year of the ZR-1 Corvette?
1990-1995 ZR-1 Corvette The C4 ZR-1 Corvette, even some 30 years after its initial year of production, carries indisputable performance merit, the likes of which few can deny. In fact, the ZR-1 is often cited as the car which helped fend off threats, both foreign and domestic in origin, to the Corvette’s elite performance car status.