How do I change the tray settings on my HP printer?

How do I change the tray settings on my HP printer?

Open the System Setup menu, and then open the Paper Setup menu. Select the tray that you want to configure. Select Paper Type, and then select the desired paper type for the tray. Select Paper Size, and then select the desired paper size for the tray.

Why does my printer say load tray 1 plain letter?

An example message would be 024-965 Load Tray 1 Letter Plain. This indicates that the print job sent has requested Letter sized Plain paper from Tray 1. If tray 1 is empty, loaded with A4 sized Plain paper, or Letter sized Thick paper this error will occur.

How do I load paper into an HP Tray 1 printer?

Introduction

1. Grasp the handle on either side of Tray 1, and pull it forward to open it.
2. Pull out the tray extension to support the paper.
3. Spread the paper guides to the correct size, and then load paper in the tray.
4. Adjust the side guides so that they lightly touch the paper stack, but do not bend it.

How do I turn off manual feed on HP printer?

Follow these steps to make sure manual feed mode is Off.

1. Press the Power button ( ) to make sure the product is on.
2. Open the Properties window for the product:
3. In the Properties window, select the Paper/Quality tab, select Automatic or the appropriate tray from the Source is: drop-down list, and then click Apply.

How do I change my paper tray settings?

To change the tray settings from the printer control panel:

1. At the printer control panel, log in as administrator, then press the Home button.
2. Touch Device > Paper Trays.
3. Select a tray.
4. To set the level of restriction on the paper tray, touch Tray Mode and select an option.

How do I change which tray to print from?

NOTE: The steps may differ depending on your application.

1. From within your application, click File => Print.
2. Click Properties.
3. Click on the Basic tab.
4. In the Paper Source dropdown choose the Tray that you want to print from.
5. Click Apply => OK.
6. Click OK or PRINT, depending on your application.

What is Tray 1 in HP printer?

When the printer tells you to load tray 1 it means the size and or type of paper being asked by the print job does not match the same that the printer thinks it has in the tray.

How do I select a different printer tray?

What is Tray Switching?

When a tray runs out of paper, tray switching enables the printer to switch between trays when the trays contain the same paper type and size. Tray switching is controlled by the printer driver, front panel, or CentreWare IS.