How much pressure does a Fox 32 have?
32 TALAS maximum air pressure is 200 psi. The recommended settings in this tuning guide are designed to be a starting point, in order to get you out on your first ride in as few steps as possible.
What PSI should my FOX shock be?
Add air pressure to the main air chamber in ~50 psi (3.4 bar) increments, slowly cycling the shock after every 50 psi (3.4 bar) addition. Set your main air chamber to between 50-300psi to prepare to set sag as described in the “Setting Shock Air Pressure” section below.
How much PSI is a Fox Float?
Blur
| FOX Float DPS | ||
|---|---|---|
| Rider Weight | Air Pressure | Shock Sag |
| 120lbs (54.4kg) | 150 psi | 9-11mm |
| 140lbs (63.5kg) | 175 psi | 9-11mm |
| 160lbs (72.6kg) | 200 psi | 9-11mm |
How do you adjust Fox float on CTD?
Setting Shock Air Pressure
- Unscrew the black air cap to expose the schrader valve.
- Slide your shocks sag setting o-ring up against the shock dust wiper.
- Rotate the CTD lever to the Descend mode (fully counter-clockwise).
How much pressure is in a Fox fork?
Sag should be set to 15 – 20% of total fork travel
| Suggested Starting Points for Setting Sag | ||
|---|---|---|
| Rider Weight (lbs) | Rider Weight (kgs) | 32/34 TALAS Pressure (psi/ bar) |
| 120-130 | 54-59 | 98psi/ 6.7 bar |
| 130-140 | 59-64 | 105psi/ 7.2 bar |
| 140-150 | 64-68 | 113psi/ 7.8 bar |
What PSI is FOX 34?
34 TALAS maximum air pressure is 200 psi. The recommended settings in this tuning guide are designed to be a starting point, in order to get you out on your first ride in as few steps as possible.
How do you tune a FOX Float CTD?
What PSI should my rear suspension be?
For the rear shock, start at about half of your rider weight for air pressure. You will have to adjust from here, but you will want to achieve the proper SAG for your frame, as recommended by your frame manufacturer. Typically this is somewhere between 30-40% of overall travel.
Is Fox Float CTD good?
Overall, this shock does a very nice job for it’s target rider or riding style. Everyday trail riding. What most of us do five times a week. Lightweight, easy to clean and service, lots of performance, with the ability to make changes to suit your personal preferences.
Does Fox Float CTD have lockout?
What exactly is the CTD function? CTD stands for Climb, Trail and Descend and it is compression damping, not “lockout”.