What is F2413-11?
ASTM F2413-11: Standard specification for performance requirements for protective (safety) toecap footwear. The purpose of this standard is to summarize the requirements for certifying protective footwear by independent, third party laboratories.
Is ASTM F2413-11 CSA approved?
o ASTM F2413-11 protective footwear do NOT meet CAN/CSA 195-14 Grade 1 toe impact criteria. ASTM F2413-11 has only one class of toe impact protection, which is Class 75 footwear (75 lbf = 101.6 joules toe impact energy compared to the 125 joule requirement of CSA 195-14 Grade 1).
What is the difference between ASTM F2412 and ASTM F2413?
ASTM F2413 is the Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear. It references test methods outlined in ASTM F2412, Standard Test Methods for Foot Protection. Replacing the specification ANSI Z41, ASTM F2413 covers performance criteria for a wide range of footwear.
How do I know if my boots are eh rated?
Check the label, typically sewn onto the tongue of the shoe and look for the ASTM F2413-11 (EH) rating.
What are ASTM F2413-18 standards?
ASTM F2413-18 is a standard that covers footwear constructed and manufactured such that the protective toe cap is an integral and permanent part of the footwear. The standard contains requirements to evaluate the performance of footwear for: Impact resistance. Compression resistance.
Is ASTM the same as ANSI?
The OSHA incorporates standards produced by an independent nonprofit organization called ASTM International, or simply ASTM. The OSHA used to include standards produced by the American National Standards Institute, or ANSI, but these were replaced by the ASTM for protective footwear standards in 2005.
What is ASTM F 2413 05?
ASTM F2413-05 Standard Specification for Performance Requirements for Foot Protection covers minimum requirements for the design, performance, testing and classification of protective footwear.
What is the ASTM standard for safety shoes?
ASTM F2413-11 Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear contains performance requirements for footwear to protect workers’ feet from the following hazards by providing: Impact resistance (I) for the toe area of footwear (75 foot-pounds);
What is ASTM safety shoes?
The ASTM provides labels inside of safety shoes that will clearly show shoes to be EH-rated or not. In order to gain this designation, the safety shoe must significantly impede the flow of electricity through the shoe and into the ground. This reduces the likelihood of electrocution for the wearer.
What is ASTM safety toe?
Safety Toe Caps. Steel toe caps (ST) are made from steel and provide you with maximum toe room and protection and meet or exceed ASTM F2413-05 I/75 C/75 impact and compression specifications. An alloy safety toe cap is made up of different metals than steel such as aluminum or titanium.