How do I set up HT CT80?

How do I set up HT CT80?

The BLUETOOTH indicator (blue) flashes quickly during BLUETOOTH pairing. Turn on the BLUETOOTH function on the BLUETOOTH device, search for devices and select “HT-CT80.” If a Passkey is requested, enter “0000.” Make sure that the BLUETOOTH indicator (blue) lights up.

How do I reset my Sony HT CT80?

If the system still does not operate properly, reset the system as follows:

1. Press SW  (subwoofer volume) +,  (volume) –, and NIGHT in sequence within 3 seconds. All 6 indicators on the Bar Speaker flash once, and the settings return to their initial status.
2. Disconnect the AC power cord (mains lead).

Can I control my Sony Soundbar with my phone?

Use Bluetooth® to pair your phone, and you’ll have wireless control over the full suite of App Remote functionality, including source, station, and app selection from either the phone or your stereo.

How do I stop my Sony sound bar from turning off?

Make sure the sound bar is receiving an input signal – which is strong enough (high enough volume) – to prevent it from entering Standby mode after 15 minutes. NOTES: If you are using a set-top box that has a volume setting, increase the volume on the set-top box (preferably to the maximum setting, or close enough).

What causes a soundbar to stop working?

Unplug the TV and soundbar for 10 seconds, and then plug them back in. Sometimes, reestablishing the HDMI “handshake” between the TV and the soundbar can fix minor malfunctions. 8. Update the firmware in the TV and soundbar, and then cycle the power.

Why is my Sony soundbar not working?

Make sure that Control for HDMI or BRAVIA Sync of your TV and audio device is set to ON. Make sure that the ARC feature of your audio device is set to ON or AUTO. Make sure that your audio device is set to TV input. Change the TV audio output setting to PCM and check whether sound is output.

Is there an app for Sony soundbars?

You can also download the free SongPal app to control the soundbar from compatible Android and iOS devices.

How do I get my Sony soundbar to turn on with my TV?

1. Connect one end of the HDMI cable (sold separately) to the HDMI IN port on your TV.
2. Connect the other end to the TV OUT (ARC) port on your sound bar.
3. Then, connect an optical audio cable from the TV’s Optical digital audio out to OPTICAL IN on your sound bar (this is necessary to hear the TV audio).

Why does my sound bar keep shutting off?

Check if your model has the Auto Standby function. If Auto Standby is activated, the soundbar will turns itself off or enter standby mode automatically after aproximately 15 minutes to reduce power consumption of the device. Some models have the capability to turn off this function.