What size are traxxas wheel nuts?

What size are traxxas wheel nuts?

Wheel nuts, splined, 17mm (blue-anodized) (4) | Traxxas.

What size wheel hex does a Traxxas?

12mm Hex
This is the Traxxas 12mm Hex Wheel Hubs with Pins (part 3654). These are used in a large number of Traxxas vehicles, including the front of the electric Stampede 2WD, Slash 2WD, Rustler, Monster Jam, Craniac, Skully, and front of the Nitro Slash.

Is traxxas metric?

Traxxas uses metric screws. US are the only industrialized nation in the world who’s not using the metric system so all other manufacturers use it. HPI, Yokomo, Tamya, Schumacher and the list goes on and on.

What MM is Traxxas Slash?

Traxxas Slash 4×4, 4.0mm front shock tower.

What size is hex Slash 4×4?

12mm
Hot Racing Traxxas Slash 4×4 Aluminum 12mm Hex Wheel Extensions (Silver) (28mm)

What size screws do RC cars use?

Other common sizes you might see in RC are 2-56 screws or 5-40 screws; these use the same definition as that above. A 2-56 screw will be a #2 size screw (smaller than a #4) and have 56TPI, meaning the threads will be a finer pitch than a 40TPI screw.

How are traxxas screws measured?

Use a ruler with millimeter (mm) markings to measure the screw. For countersunk screws, place the screw alongside the ruler and measure the length from the head of the screw (flat surface) to the bottom of the threads. Next, measure the width of the screw by placing the bottom of the screw against the ruler.

Can you put bigger tires on a Traxxas Slash?

The Monster Slash is effectively geared “taller” with bigger tires, even though you didn’t actually change the pinion or spur gear.

What size hex is on the Rustler 4×4?

12mm hex
All 4 wheels have the 12mm hex.

What size are traxxas screws?

Set of six 3mm x 6mm button-head machine screws (hex drive) Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

What size are RC screws?

These screws come in a slew of different lengths and even sizes, the most common being a 4-40 or 5-40 size.

What size wheels fit Traxxas Slash?

The tire and wheel set is a direct fit for the Traxxas Slash 4×4 (front/rear), rear of the Slash 2wd and can be used with other brands of 1/10 scale RC short course trucks that use 12mm hex wheels with a similar offset. Specifications: Overall Diameter: 4.25″ (108mm) Overall Width: 1.8″ (46mm)