How do you put a Jabra Cruiser in pairing mode?
Turn on your Jabra Cruiser by sliding the On/off switch to the “on” position. To enter pairing mode press and hold (5 seconds) the Answer/end button on your speakerphone until the light flashes blue and pairing mode is announced.
How do I reset my Jabra Cruiser 2?
Turn on your Jabra Cruiser2 by setting the On/off switch to the “on” position. Simultaneously press and hold (5 seconds) the Volume up, FM, and Answer/end buttons until you hear a beep tone. Turn off your Jabra Cruiser2 by setting the On/off switch to the “off” position. Your Jabra Cruiser2 is now reset.
How do I connect my Jabra Bluetooth speaker to my phone?
To enter pairing mode, press and hold (2 seconds) the Bluetooth button on the speakerphone. To pair, go to the Bluetooth menu on your mobile device and select the Jabra Speak 510 from the list of available devices. Enter “0000” (four zeros) if you are asked for a pin code.
How do I pair my Jabra Freeway?
Turn on the Bluetooth setting on your mobile device. Turn off your Jabra Freeway by sliding the On/off switch to the “off” position. To enter pairing mode, simultaneously press and hold (5 seconds) the Answer/end button and slide the On/off switch to “on”. The light flashes blue, and pairing instructions are announced.
How do I reset my Jabra Cruiser?
Turn on your Jabra Cruiser by setting the On/off switch to the “on” position. Simultaneously press and hold (5 seconds) the Volume up, FM, and Answer/end buttons until you hear a beep tone. Turn off your Jabra Cruiser by setting the On/off switch to the “off” position. Your Jabra Cruiser is now reset.
Why is my Jabra speaker not working?
To reset the Jabra speakerphone, simultaneously press and hold (8 seconds) the Answer call button and the End call button until ‘Factory reset’ is announced. Resetting the Jabra speakerphone clears the list of paired Bluetooth devices and also clears all personalized settings.
How do I pair my Jabra Bluetooth?
Android. Go to Settings and turn on Bluetooth. In Bluetooth click “Pair new device”. When you see your Jabra headphones or headset come up in the list, tap it and it should be paired with your phone.
How do I connect my Jabra Bluetooth to HFS001?
Press and hold the “Answer/End” button, located on the end of the unit that faces the driver when the HFS001 is installed on the visor, for about five seconds. When you hear “Pairing Mode,” the speaker is now discoverable by other Bluetooth devices.
How do I turn on my Jabra speaker?
Plug the Jabra Speak 510 USB cable into any available USB port on your computer, or ▪ Press and hold (2 secs) the On/Off button to turn the Jabra Speak 510 on or off.
How do I use the Jabra cruiser2?
Jabra CrUISEr2 PLACe tHe sPeAKeRPHone In YoUR VeHICLe The Jabra CrUISEr2 sits discreetly and conveniently on the sun visor using the attached clip . For optimal sound quality place the Jabra CRUISER2 right in front of you and speak directly into the speakerphone.
How do I mute/un-mute my Microphone on Jabra cruiser2?
Jabra CrUISEr2 Mute/un-mute – Press the mute button to mute your microphone during a call and again to turn mute off . Adjust sound and volume – Tap the volume up or volume down button to adjust the volume level . (In FM mode you are not able to adjust volume via Jabra CrUISEr2 – use your car stereo) .
How do I charge my Jabra speakerphone with a car charger?
Make sure that your speakerphone is fully charged for two hours before you start using it . Use the USb cable to connect Jabra CrUISEr2 to the car charger . Plug the car charger into your car’s power outlet . The battery Status Icon will light up red while charging . When fully charged the battery Status Icon will turn green .