How do I fix the CPU fan error on my ASUS motherboard?

How do I fix the CPU fan error on my ASUS motherboard?

In BIOS, go to the Fan control section not the monitoring section. The CPU fan headers should be listed – should show “CPU Q-FAN Control – Enabled or Disabled”, Enable that setting. Then you will see the setting below that is “CPU Fan Speed Low Limit”, set that to Ignore.

Should I Enable CPU fan fail warning?

If “CPU Smart Fan” is enabled, the CPU fan speed will spin according to the CPU’s tempreature (The higher the tempreature, the faster the speed and vice-versa). To avoid this from happening, it is recommanded to first disable “CPU Fan Fail Warning” option and then enable “CPU Smart Fan” option.

What does the error message “CPU fan error” mean?

When you see the error message “CPU FAN Error” in POST, it means the system doesn’t detect the FAN. You can refer to the steps below to resolve the issue. 1. Please make sure the CPU FAN is installed on the right position of the motherboard and twist the screws tightly

How do I install the CPU fan?

1. Please make sure the CPU FAN is installed on the right position of the motherboard and twist the screws tightly 2. Ensure that the CPU FAN cable is securely installed to the CPU_FAN connector instead of the CHA_FAN. 3.

What does FF mean on a motherboard?

The dreaded FF error can be one of many things. The dreaded “FF” POST code, or no POST at all. This fix is best done outside a case to ensure the case isn’t shorting the motherboard: Qcode: FF indicates Fault Found.

Why is my CPU fan speed low at 200 rpm?

If you install another brand of CPU FAN with lower revolutions speed, the system may not be able to correctly detect it.You can try to set “CPU Fan Speed Low Limit” to 200 RPM in BIOS configuration. * “CPU Fan Speed Low Limit” appears only when you set the CPU Q-Fan Control to [DC Mode], [PWM Mode], and [Auto].