How do you hang curtains on an arched window?

How do you hang curtains on an arched window?

Pick a spot along the upper one-third of your arched window and run a curtain rod across the opening to visually separate the arch from the lower section of the window. Hang your window panels over the lower portion, and you have managed to treat the arch as two separate window openings.

Do they make curved curtain rods?

Solid curtain rods that can be curved or bent come only in a few sizes. Keep in mind that these are solid, not hollow, and tend to get very heavy. Beautiful design, and limited sizes available.

How do you make a bent curtain rod?

Cut the Rod Sections

1. Cut the Rod Sections.
2. Cut two sections of hollow, metal curtain rod with a pipe cutter.
3. Create the Corners.
4. Cut one 12-inch piece of clear plastic pipe for the corner with the shears.
5. Connect the Corners to the Rod.

What is a French return curtain rod?

A French rod, or French pole, is one that instead of cutting off in midair is a curtain rod that returns to the wall. According to Designer Drapery Hardware these curtain rods are “one of the most popular window treatments.

How do you bend PVC curtain tracks?

Use the cords to pull the two bending inserts to the centre of the position where you want to bend the track. Firmly bend the track at the correct angle position by applying gentle pressure, slightly bending the track a number of times until your desired angle is achieved.

How do you cover a rounded window?

If you aren’t concerned with fitting your curtains to the shape of your arched window, covering it is simple! Use a drill or screwdriver to install a curtain rod above the arch and hang curtains or drapes that will cover the entire window. You can also cover the lower part of the window and leave the arch open.

What is a return rod?

Return rods have a 90 degree return back to the wall. One advantage of this is that you can utilize this curved area of the rod to stack the drape which will reduce the wall space that the curtain stack requires to clear the window. A 60″ return rod will measure exactly 60″ on your wall.

How do you Mount curtain rods?

Hold one curtain rod mount up and make sure it is high enough so that the curtains will cover the top of the window. Higher than the top of the window by a few inches may look better, and block out more light. Using a pencil, mark the location of the bottom screw hole on the paper and set the curtain rod mount down.

How do you fix a curtain rod?

Center the curtain on the curtain rod and attach the ends — and center mount, if applicable — to the curtain rod mounts by sliding the top pin of each mount into the hole on the top of the curtain rod end. Slide the rod down onto the pins and settle the base of the curtain rod over the mounts.

What is a flexible curtain rod?

The rods are great flexible traverse curtain hardware for supporting draperies. It is a traverse curtain rod that will bend to the shape of your curved window. This bendable curtain rod is an economical alternative to getting a custom made curtain rod for a curved window such as a bay or bow window.

What is a curtain rod bracket?

Curtain Rod Brackets. These adjustable drapery rod brackets adjust 3″ to 4 1/2″ from the wall and are for use with rods measuring up to 5/8″ in diameter. Hardware included. Includes two brackets. Modern yet timeless, the Cambria Classic Complete Adjustable Wall-Mount Replacement Brackets put the finishing touch on your window decor.