How do you reset the maintenance light on a Volvo S40?

How do you reset the maintenance light on a Volvo S40?

How to Reset the Time for Maintenance Light on a Volvo S40

1. Press in the trip odometer reset knob. Hold the knob down.
2. Turn the ignition switch to the “II” position. Do not start the engine.
3. Hold the odometer knob down for about 30 seconds until the maintenance light blinks. Release the trip odometer knob.

How do you turn off the check engine light on a 2005 Volvo S40?

Turn the Volvo’s ignition key to the “II” position in the ignition. Wait for the light on the diagnostic tool to stop flashing. The codes on your Volvo’s electronic control unit should be cleared at this point and the check engine light will reset itself.

How do you reset the service light on a Volvo?

Press and hold the trip computer while turning your key to position two. The center arrow will flash red three times. On the third flash, you will let go and an alert will note that you just reset your service light.

How do you reset the oil light on a Volvo?

How do you reset the service light on a 2003 Volvo S40?

Volvo S40/V40 Service Light Reset

1. Hold down the odometer button.
2. Turn the ignition so all the lights come on.
3. Keep holding the odometer down for 30 secs or until the service light starts flashing.
4. Release the odometer button.

How do you reset the service reminder on a Volvo?

How do I reset my Volvo maintenance message?

Step 1: Reset Maintenance Message

1. Press and hold trip reset button,
2. turn on the ignition,
3. wait for the yellow warning light to start blinking,
4. release the button and wait for confirmations sound,
5. turn off the ignition,
6. turn the ignition back on to check if the service message is gone.

Why does my Volvo say Book time for maintenance?

The sole function of Volvo’s Service Reminder Indicator is as a reminder for the driver to take their car in for an oil change or other routine maintenance. Check the owner’s manual for more information about what oil is recommended for your vehicle.

How do you reset the oil light on a 2006 Volvo v70?

1. Insert key in to ignition but don’t turn it yet.
2. Press and Hold the odometer trip counter reset button.
3. Turn ignition switch to “run” position (Position II)
4. After Service light flashes, release odometer reset button.
5. Turn ignition off.
6. Turn ignition back on to confirm reset.

How to change the oil in a 2005 Volvo S40?

Oil & Filter Change Volvo S40 (2004-2011) – 2005 Volvo S40 i 2.4L 5 Cyl. 1. Getting Started – Prepare for the repair 2. Open the Hood – How to pop the hood and prop it open 3. Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug

How do I reset the oil light on my Volvo V50?

For reset the oil service light/message indicator in your 2004 to 2013 Volvo V50 and s40 or 2006 to 2013 Volvo C30 and C70, is very simple. Step 1. Turn key to position 1 Step 3. With the trip reset button still pressed, turn the key to position 2. Step 4. Keep the trip reset button pressed until the yellow [i] light start blinking.

What type of oil do I put in my S40?

Most Volvos have the oil type printed on the oil cap – it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn’t printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your S40.