Is the T15 a good transmission?

Is the T15 a good transmission?

The T15 is among the strongest of American made three-speed transmissions. They had a relatively short run in Jeeps, but offered good service, even if the gearing was not as broad as the available T18.

How do I identify my Borg Warner transmission?

Locate the identification tag number. A quick way to confirm that your transmission is a Borg Warner and what vehicle it was designed for, is to locate the identification number stamped into the “metal tag bolted onto the tail housing,” according to 5speeds.com.

How do I know what Borg Warner 4 speed transmission I have?

The easiest way is by knowing the construction of each unit, and the differences are obvious. If the case and side cover are made of cast iron, that would make it a Saginaw transmission. If it has a cast-iron case with an aluminum side cover and tail housing, that will mean you have found a Borg Warner.

How do I identify my Borg Warner 5 speed transmission?

An identification tag number, which is on one of the mounting bolts on the tail case, can identify all T-5 manual five-speeds. Whether they are Borg-Warner or Tremec units, all have a seven-digit ID number on this tag.

How do I know what transmission I have in my Jeep?

The transmission in a Jeep is identified by an identification plate. This plate is stamped on the housing of the transmission and the location can vary, depending on the model year of your Jeep. The numbers on the identification plate provide the build date, part number and the build date.

What vehicles have a 42re transmission?

How Do I Order?

• 1989-2003 Dodge Dakota.
• 1998-2000 Dodge Durango.
• 1989-2001 Dodge Ram pickup 150 / 1500.
• 1989-2003 Dodge Ram Van B150 / B250.
• 1993-2004 Jeep Grand Cherokee.
• 1996-1998 Jeep Grand Cherokee 5.2 V8.

What is the difference between a Borg Warner T14 and T15 transmission?

The Borg Warner T14 and T15 transmission are similar in designation, and visually somewhat similar. However, the T14 did use a three-bolt front bearing retainer whereas the T15 used a four-bolt front bearing retainer. T15 was available attached to the Jeep Dana Spicer Model 20 transfer case in the 1971-1979 Jeeps.

What kind of transmission does a jeep T15 have?

It was offered in CJ Jeeps up through 1975 and in Full-Size Jeeps through 1979. The T15 was primarily found behind the AMC V8 engines as the base transmission, but was also found behind the AMC 232 and 258 I6 engines as an upgrade option over the T14. The upgrade to the T15 transmission was the Jeep T18 four-speed.

What should I add to a T15 transmission?

You may also want to add new bearing retainer, nuts, dogs & wires, extension housing bushing, small parts kit, shifter bushings. An illustrated drawing of the T15 is provided. The T15 has a Cast iron case that is a top loaded transmission with side or tower shifts.

What is the difference between a T14 and a T15 transfer case?

However, the T14 did use a three-bolt front bearing retainer whereas the T15 used a four-bolt front bearing retainer. T15 was available attached to the Jeep Dana Spicer Model 20 transfer case in the 1971-1979 Jeeps.