What tool removes ball joints?
Separate the ball joint from the lower control arm with your ball joint separator. You can operate the tool with a socket wrench, using an appropriately sized socket….Removing the ball joint.
| Set up ball joint separator tool. | Remove axle nut. |
|---|---|
| Fit upper adapter onto ball joint. | Fit lower adapter onto ball joint. |
How much is a ball joint press kit?
$40.47 & FREE Shipping.
How much is a ball joint separator tool?
Compare with similar items
| This item OTC 6297 Ball Joint Separator | ABN Universal Ball Joint Separator – Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATVs | |
|---|---|---|
| Price | $4425 | $19.49$19.49 |
| Sold By | National Tool Warehouse | Autobodynow |
| Number of Items | 1 | 1 |
Can you use AC clamp to press a ball joint?
Prepare the C-clamp. This is the major tool that you will need and the one that will be responsible for pressing the ball joint. The clamp has a hole at the bottom, which is the part that will allow you to press in and out the ball joint in the absence of touching the stud.
What tools are needed to replace ball joints?
The basic tools you will need to replace a ball joint are: • The replacement all joint. • 8mm hex head wrench. • 22mm or 15/16” combination wrench. • ball joint separator tool (also called a ‘pickle fork’) • hammer. First you will want to diagnosis the problem.
How do you install ball joint?
Insert the shaft of the lower ball joint into the steering knuckle. Install the nut securing the lower ball joint to the steering knuckle and tighten to 33 foot-pounds of torque. Insert a cotter pin into the lower ball joint and secure the cotter pin using a pair of pliers.
How do you remove ball joints?
Remove the cotter pin and slotted nut (15/16 socket) from the lower bolt and toss out the old pin. Take a 15/16 ball joint separator (pickle fork) and whack it with a heavy hammer until the ball joint pops up out of the tapered hole. The geared hub will drop down out of the way supported by the lower ball joint.
What is a ball joint service kit?
Everything you need to service ball joints on most 2WD and 4WD vehicles. This ball joint service kit includes a C-frame press along with installation and removal adapters. The parts in this ball joint kit are drop forged and treated with black oxide to resist rust and corrosion for added durability.
https://www.youtube.com/watch?v=BSMoEiXjUJs