Are OMC Cobra outdrives good?
The OMC Cobra is actually a good drive. The downfall and bad reputation can often be contributed to misadjusted shift cables, engine idle too high, and inoperable ESA switches.
What is OMC sterndrive?
The OMC stern drive was produced by the Outboard Marine Corporation from 1962 until the end of 1992. They mounted the engine and sterndrive on the stringers of the boat; the drive was sealed to the transom with a large rubber diaphragm. The OMC stern drive was then referred to as the stringer mount drive or “stringer”.
How do I know if I have an OMC sterndrive?
The model and serial numbers of the vertical drive should be located on the engine model and serial number plate. If the vertical drive model and serial numbers are not recorded with the engine model and serial number, they can be found on a plate located on the vertical drive.
What is OMC engine?
Refers to your outboard’s model/ serial number. OMC itself stands for the Outboard Marine Corporation, which was previously the world’s largest manufacturer of outboard motors – overseeing brands such as Evinrude and Johnson.
How do I find out what motor is in my boat?
On the side of your motor you’ll find a plate. This tells you the make, model and serial number. You’ll only need the serial number if it’s an outboard motor. Different model plates have the same information but may vary in layout.
How do I find out what engine is in my boat?
You will find your boat engine serial number and model number on the transom mount of the engine.
- For Evinrude/Johnson, look to the left of the mount.
- For Mercury, Mariner and Force, look on the right side of the motor on the transom mount.
What kind of motor is a 4.3 OMC Cobra?
This engine for sale is a Rebuilt OMC 4.3L/262ci complete engine. Fits OMC 1986 to present….Specifications.
| Condition | Remanufactured |
|---|---|
| Cubic In. | 262ci |
| Horsepower | 190 |
| Engine Configuration | Complete |
| Fuel Type | Gas |
What is the warranty for OMC Cobra sterndrives?
New and remanufactured gearcases, upper drive shaft housing assemblies and complete outdrives for OMC Cobra sterndrives come with a one-year warranty. Prices include shipping in the continental US.
How do you install an OMC cobra complete outdrive?
OMC Cobra Complete Outdrive Installation. BRP Marine I/O. [8] 1. Remove oil level indicator plug and install lifting eye until full thread engagement is achieved. Use a suitable hoist to remove vertical drive from holding fixture. Remove and clean gasket material from pivot housing and upper gear housing.
What is an OMC stern drive?
In the mid 80’s OMC or Outboard Marine Corporation introduced the OMC Cobra, a sterndrive that was modeled after the leading Volvo outdrives. We stock OMC Stern Drives for all of the OMC models including OMC Cobra, and the mechanical and electric shift OMC Stringer.
When did the Volvo Cobra hybrid sterndrive come out?
The new modern factory and the Cobra engineering attracted the attention of Volvo and in 1993 OMC and Volvo entered into a joint venture and began producing a hybrid sterndrive with the OMC Cobra transom plate assembly and the excellent Volvo cone clutch outdrive.