What is ISO code in container?

What is ISO code in container?

ISO6346 – Shipping Container Standard. ISO 6346 is an international standard which describes the identification of a shipping container. The standard is maintained by the BIC (International Container Bureau) and covers the serial number, owner, country code, and size of any given shipping container.

Why do all container numbers end in U?

It is always three capital letters and the code is registered with the Bureau of International des Conteneurs in France. The U at the end is the letter for all standard cargo containers. This is literally used to check the container number to keep it accurate.

How thick are the walls of a shipping container?

How Thick Is the Metal on a Shipping Container? The walls on small shipping containers are usually made with 14 gauge corrugated sheet steel panels. The thickness is 0.075 inches, and these panels are welded to the rest of the structure.

How does container number look like?

Container number, which is one of the container markings, is printed on three spots of each freight container: one on the doors end, one on the side wall and one on the top of the container. Containers are the main Cargo Transport Units (CTU) in international transportation.

What are the ISO markings on a shipping container?

Each of the following ISO markings must be displayed on both ends, both sides and at the top of a container: Container numbers (consisting of owner codes, equipment categories, serial numbers and check digits); The container number is the primary marking on the door of the container.

What is the container number on a shipping container?

Container numbers. The container number is the primary marking on the door of the container. It’s a sequence consisting of seven numbers and four letters. An example of a container number could be ‘HBXU 3005342 ’. This code comprises of the: Owner code: three letters, being HBX in the above example.

Where do I find the shipping mark on a container?

The mark shall be displayed in two places on each container, i.e. near the right-hand edge of each side, at a distance of no more than 1,2 m (4 ft) from the top of the container and within a distance of 0,6 m (2 ft) from the right-hand edge, below the identification number of the container.

What is the ISO 6346 type code for a container?

Container Type code designation (ISO 6346 AMENDMENT 3) The third characters gives the codes to identify the container type and other characteristics related to its type. Warning: new container type code using an alpha character in the 4th position of the size-type code indicates a container of reduced strength.