How to clean vitapur water dispenser?

How to clean vitapur water dispenser?

Clean with Vitapur water dispenser cleaning solution or mild soap and water mixture. For tough deposits, add vinegar and let soak until the deposits come loose. Then wash, rinse and dry throroughly. Put the grill back on the tray and install on the dispenser.

How do you clean a bottom loading water dispenser?

How to Clean a Bottom-Loading Water Dispenser

1. Turn off and unplug the machine.
2. Drain all water from the reservoir.
3. Add your bleach, vinegar, or cleaning solution to the water bottle and reattach it (so that the reservoir inside the machine fills).
4. Let the mixture sit inside the reservoir for at least 10 minutes.

How do I reset my hot water dispenser?

Unplug the tank from the electrical outlet. Open the access panel on the front of the tank with a screwdriver. Locate the thermal cut-off button and press it to reset the switch. After replacing the access cover & screw and plugging it back in, allow 10-15 minutes for the water to reheat.

How do you turn on a hot water dispenser?

How to Turn on the Hot Water on a Water Bottle Cooler

1. Plug the water cooler into an electrical outlet.
2. Place the water jug in its proper holding position.
3. Locate the three buttons near the top of the unit that control the water temperature.
4. Press the button under the green light.
5. Press the button under the red light.

How do you clean a bottom load water dispenser with vinegar?

Why is my water dispenser not giving me hot water?

If you have no hot water at all from the unit, it may not have any electrical power. Check that the cord is in the outlet. If the outlet is a ground fault circuit interrupter, or GFCI, push the reset button in to restore power to the outlet. Remove other appliances from that outlet so you don’t overload it.

How do I turn the hot water on my water dispenser?

Which Vitapur countertop water dispenser is right for You?

For convenient access to refreshing water, look to the Vitapur VWD2036WBLK-1 counter-top water dispenser. With its compact design, this water dispenser makes it easy to add a station for great-tasting drinking water to your kitchen, office, den, or wherever it’s needed the most!

Does Vitapur have curbside pickup?

Curbside pickup available. For convenient access to refreshing water, look to the Vitapur VWD2036W-1 counter-top water dispenser. With its compact design, this water dispenser makes it easy to add a station for great-tasting drinking water to your kitchen, office, den or wherever it’s needed the most!

Does the Vitapur energy cooler pump water?

It doesn`t pump water, it gavitys out of the bottle. 1/2/2020 8:47:32 PM • Vitapur Energy… • Answered on Jan 02, 2020 My unit stopped cooling water after I plugged it back in from a holiday.

How do I check the water level in my water dispenser?

1. Unplug the unit, turn off the power switch and remove the bottle. 2. Remove the bottle support collar and check the water level inside the reservoir – it should be at roughly three-quarters full. Water level should be approximately 3/4” – 1” BELOW VENT TUBE.