How to clean Bissell ProHeat 2x?

Flush the system by setting the Custom Clean knob to the “Rinse” Setting

Turn on the machine

While holding down the trigger make one forward and reverse wet pass

Release the trigger and make another forward and reverse pass

Reset the dial to ‘tools’,then clean the hose by suctioning clean water from a container

Before replacing the hose,lift and stretch it to make sure no liquid remains

Any attachments that need cleaning can be removed and rinsed,then dried and replaced in the tool caddy

Your system is now clean and flushed!

Rinse your water tank with hot water,taking care to clean all around the pouch

Clean the top half of the tank through the nozzle area

Pop out the red filter and rinse that as well

Replace it before putting the tank back together

Before putting the tank back on,remove the floor nozzle and rinse it out at the faucet

Pull off and throw away any loose hair or debris that have attached to the brush rolls

The inside of the end caps can be wiped clean or removed and rinsed clean

Replace the nozzle on the machine by hooking the tabs into the holes on the bottom then securing it with the screw

Your machine is now ready to store until your next use

Are Bissell pet vacuums ideal for pet owners?

Ideal for pet owners, the Bissell has everything you need to tackle tough stains that you thought would be with you forever, including (but not limited to) those left behind by your furry roommate. With three multi-surface pet brushes and a pet cleaning formula, the Bissell CrossWave Pet Pro easily picks up pet hair and removes odors.

How to use a Bissell carpet cleaner?

Remove all furniture.

Vacuum the carpet.

Treat stains.

Fill the water tank with hot tap water.

Add carpet cleaning solution.

Set the dials at the base of the carpet cleaner.

Set the tool dial to the cleaning option.

Press the power and heater buttons.

Press the handle trigger to spray water.

Empty the dirty water.

How do you operate a Bissell carpet cleaner?

To operate a Bissell carpet cleaner, take out the water and formula tanks of the machine, pour water and a cleaning solution into them, and replace the tanks. Then, provide power supply to the machine, let it get heated, push the trigger to begin the cleaning process over an area on the carpet, and then release it to suck in the used solution.