What is DIMM and RIMM?

What is DIMM and RIMM?

In a computer, a RIMM is a memory module developed by Kingston Technology Corp. that takes up less space inside the computer than the older DIMM module and has different pin characteristics. A RIMM has a 184-pin connector and an SO-RIMM module has a 160-pin connector.

What is RIMM slot?

RIMM is computer memory that resembles DIMMs; however, it is 184-pin and is available with built-in ECC support and Non-ECC at speeds up to 800 MHz. Therefore, users must utilize C-RIMM modules in any slots that do not have RIMM modules. SO-RIMM is a 160-pin module and is Rambus memory used in laptop computers.

What does RIMM mean?

slang to lick, kiss, or suck the anus of (one’s sexual partner)

Which is better DIMM or Sodimm?

DIMMs are used in desktop computers and servers. A DIMM (133MM) is about twice as long as a SODIMM (67MM). DIMMs can carry features not normally found on SODIMMs such as ECC and REGISTERED. SODIMMs are used in notebook computers.

Which computer memory consists of SIMMs and DIMMs?

DIMM stands for Dual In-Line Memory Module, a type of computer memory that installs in the motherboard’s memory slots. While DIMM’s predecessor, SIMM (Single In-Line Memory Module), are 32-bit and must be installed in matched pairs to achieve 64-bit data paths, DIMMs are natively 64 bits.

What is the difference between Sdram and DRAM?

Synchronous random access memory (SDRAM) is the same as DRAM except that regular DRAM is asynchronous. Synchronous random access memory stays synchronized with the computer’s clock which allows greater efficiency in storing and retrieving data compared to asynchronous DRAM.

What is the difference between SIMM and DIMM memory?

The main differences between DIMM and SIMM are: A DIMM is a double sided SIMM. SIMM can be installed in in-line pairs while DIMM is independent of the side. Because a DIMM has separate contacts on each side of the board, it provides twice as much data as a single SIMM.

How many pins are available in Rimm?

The standard 16/18-bit RIMM has 184 pins, one notch on either side, and two notches centrally located in the contact area.

How do I know if my RAM is Sodimm or DIMM?

A Registered DIMM is a memory module designed for network servers and high end workstations. A SODIMM (Small Outline Dual In-line Memory Module) is a memory module with a smaller outline and thickness than standard DIMM modules and designed primarily for notebook computers.

What is the difference between DIMM and DRAM?

DIMM stands for Dual In-Line Memory Module, a type of computer memory that installs in the motherboard’s memory slots. DRAM consists of a transistor and capacitor that create a memory cell, which represents a single bit. The DIMM is installed on a motherboard and stores each data bit in separate memory cells.

Is DIMM and DDR4 the same?

Physically, a DDR4 module, or dual in-line memory module (DIMM), looks very similar to a DDR3 DIMM. However, DDR4 has 288 pins compared with DDR3’s 240 pins; DDR4 SO-DIMMS have 260 pins instead of 204 in DDR3. This design also lowers insertion force, as not all pins are engaged at the same time during module insertion.

What is the difference between a Simm and a DIMM?

The main physical difference between SIMMs and DIMMs is that DIMMs have different signal pins on each side of the module, resulting in two rows of electrical contacts. That is why they are called dual inline memory modules, and why with only 1″ of additional length, they have many more pins than a SIMM.

What is the difference between DDR and standard DIMM?

Standard DIMMs have 168 pins, one notch on either side, and two notches along the contact area. DDR DIMMs, on the other hand, have 184 pins, two notches on each side, and only one offset notch along the contact area.

What is the meaning of the acronym RIMM?

RIM M is not an acronym and is a trademark of Rambus incorporated for the Direct Rambus or DRAM (RDRAM) modules. RIMM is computer memory that resembles DIMMs; however, it is 184-pin and is available with built in ECC support and Non-ECC at speeds up to 800MHz.

What is the difference between RAM and DDR memory?

RAM (Random Access Memory), SIMMs, DIMM’s, RIMM’s. DDR means double data rate. DDR memory processes data on the rising edge and the falling edge of the clock cycle doubling the data rate. The major difference between SIMM and DIMM is the width of the data path each type has and the way the data is moved from the system bus to memory module.