What is a RS-232C port used for?

What is a RS-232C port used for?

An RS-232 serial port is most often used by repair technicians to perform diagnostics and service updates. It may also be used to control a device when connected to a computer running a home automation system or Custom Integrated Audio/Video (A/V) system, such as the CAV-M1000ES Multi-room A/V Distribution System.

What does rs232c control mean?

In simple terms, an RS-232 connection on a projector, for example, allows you to control the device remotely using a third party interface, such as a Macro Wall Controller, PC-based control software or a touch screen device such as an iPad or Android tablet connected to a control processor.

What is RS-232C SVC only?

The RS232 port is for an external control system, other than the remote control. The only available method for using headphones with this device would be to connect a Home Theater System or stereo to the OPTICAL Digital Audio Output jack, and then connect the headphones to that device.

What is RS-232C setup?

RS-232C Setup. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the USB jack on the product back panel.

How can I make RS232 cable at home?

How to Make an RS232 Serial Cable

1. Create four jumper wires from a two-inch piece of data cable.
2. Strip off two inches of the protective sheath from both ends of the six-foot data cable.
3. Plug in the soldering iron and allow it to heat up for five minutes.

What devices still use RS232?

PLCs use RS232 to talk to other modules or even other PLCs. These modules can be anything that also uses RS232 such as, operator interface or HMI, computers, motor controllers or drives, a robot, or some kind of vision system.

How do I create a serial port?

To configure the Serial Port for your device, on your computer go to Control Panel – Device Manager, select “High-Speed USB Serial Port (Com X)”, right click and select Properties. Click the Features tab. This tab is used to change the COM port number and configure the port.

What is RS-232C and how does it work?

RS-232C – What is RS-232C? RS-232C is a long-established standard (“C” is the current version) that describes the physical interface and protocol for relatively low-speed serial data communication Networks between computers and related devices.

How do I Turn Off the RS232C control?

The RS232C control setting is for professional use only. Follow the steps below to turn it off. Using the supplied remote control, press the HOME button. Select Settings or the icon. Under Network & Accessories category, select RS232C control. Select Off . Get Support Content on the Go!

What is the difference between RS-232 and DTE?

RS-232C, EIA RS-232, or simply RS-232, refers to the same standard defined by the Electronic Industries Association in 1969 for serial communication. DTE stands for Data Terminal Equipment. A computer is a DTE.

Can I use the RS-232 port to install the product?

IMPORTANT: The RS-232 feature is not part of the normal operation of the product. As such, any support for using this port or its functionality is not available. Due to the complexity of installation and issues that may occur during an installation using the RS-232 port, it is recommend that it only be completed by a professional custom installer.