How do you reignite a Baxi combi boiler?
To reset the boiler, turn the selector switch to the R (Reset) position. Hold for at least 5 seconds and release. The fault code will be replaced with the boiler’s current temperature. At this point on a neon indicator boiler model, the flame failure light will stop flashing and will be replaced with the burner light.
Why isn’t my Baxi boiler not firing up?
A common culprit for this fault on Baxi boilers is a lack of pressure. If your system is set lower than 1.5 bar then it won’t operate correctly. Now, the quick fix is to top up the pressure using the filling loop. And once you’ve topped up the pressure, you’ll need to reset the boiler.
What does e1 31 mean on a boiler?
Overheat lock out
E131. Overheat lock out. This may follow a power cut, try reset.
Where is the pressure tap on a Baxi boiler?
Turn the tap located in your left hand by turning it fully and access the control panel of your boiler. For that, you will see the gauge of your boiler pressure is working. After that, start opening the tap located in your right-hand side by turning slowly, which will allow all the water entering into the room.
What does E133 mean on a boiler?
E133. Indicates that the gas supply has been interrupted, ignition has failed or the flame has not been detected. Ensure that the gas supply has not been turned off, and turn the selector switch to the reset position and hold for at least 5 seconds. If the boiler does not relight, or the code is displayed .
What does E133 mean on my Baxi boiler?
What do Baxi error codes E133 or E28 mean? If your boiler has shut down and is showing error code E133 or E28, then your condensate pipe may be frozen. Warm the condensate pipe across its exposed length using either a hot water bottle, a microwaveable heat pack or warm water poured from a watering can.
What does e mean on a Baxi boiler?
Possible Cause: Temperature measured by return sensor greater than flow sensor. Error Code: E.01 – .04. Possible Cause: Loss of flame detected 5 times in 24 hours (with burner on). Error Code: E.01 – .11. Possible Cause: Incorrect fan speed – external draught over the boiler or defective gas/air unit.
What does E168 mean on a Baxi boiler?
Baxi Duo-tec Combi HE – E168 – Boiler Error Code Error code E168 is displayed when the boiler has detected a problem but can’t work out exactly what it is. This can happen if the boiler has reset after developing a fault or if there has been an issue externally which affects the boiler, such as a fault with the electrical supply.
What should I do if my Baxi 160 has a fault?
If you’ve noticed the Baxi 160 fault code appear before, have reset your boiler to try and clear the fault, and can’t hear the fan running; turn off your boiler immediately. Sometimes a reset can get a boiler working for a few minutes, fooling it into thinking the fault leading to an error code has been fixed.
Why is my Baxi boiler displaying an error code?
If a Baxi boiler develops a problem, the boiler will display an error code to help you identify the issue. The most common of these error codes are explained below. If the boiler you’re working on is displaying an error code which isn’t described below, please contact Baxi Customer Support who will be happy to help.
What should I do if my Baxi 160 fan stops working?
That’s exactly why when the fan stops working, the boiler should too. If you’ve noticed the Baxi 160 fault code appear before, have reset your boiler to try and clear the fault, and can’t hear the fan running; turn off your boiler immediately.