What kind of fluid goes in a Ford transfer case?

What kind of fluid goes in a Ford transfer case?

*****For 1997-2007 Model Years, most Ford Factory Shop Manuals list Mercon as the recommended transfer case fluid. Ford introduced Mercon ATF in 1987 and Mercon is the recommended fluid for most 1997 to 2007 4×4 Ford transfer cases.

What is Motorcraft transfer case fluid equivalent?

Ford has replaced it with Mercon LV. *XL-12 Transfer Case Fluid has been discontinued by Motorcraft® and replaced by Mercon LV. As of May 2019 an old Motorcraft web page still listed Mercon LV as Not For Use in Transfer Cases, but the most recent LV page specifically states LV is now for all transfer cases.

What fluid does a Borg Warner 1356 transfer case take?

The BW1356 requires MERCON ATF (or similarly spec’d automatic transmission fluid) for lubrication.

How many quarts does a transfer case take?

It’s going to take between 6-8 quarts to fill it up. T-case will take about 2.5 quarts. Get a case of Valvoline ATF+4 and use the left overs to change out the power steering fluid. Perfect!

Can I use Mercon V instead of Mercon?

Can I Use Mercon V Instead Of Mercon? According to the ford manual, Mercon V and Mercon aren’t compatible. However, car owners can use these dual usage fluids in transmissions that demand the MERCON V type fluid. Besides, some marks that these two fluids aren’t interchangeable.

What’s the difference between Mercon and dexron?

Mercon has a different flash point from Dexron. Mercon has a flash point of 170 degrees Fahrenheit and a fire point of 185 degrees.

What is the difference between Mercon V and Mercon LV?

Mercon V is the most common automatic transmission fluid for a ford model. On the other hand, Mercon LV is not compatible with any Mercon fluids. Even it doesn’t be mixed with Mercon V. Since Mercon LV is designed to meet the demands of most modern transmissions, it is compatible with older GM Dexron specifications.

What is the difference between mercon SP and LV?

MERCON SP and MERCON LV are different lubricants. It is true they are for very similar Ford vehicles. Soecifically, the SP fluid is for Ford 6R60 and early 6R80 transmissions, and LV is for later 6R80 and 6R140 transmissions.

How do I identify my Ford transfer case?

Identification: Metal tag stamped with “1356” located on transfer case, typically on the backside. Magnesium, ribbed, two piece transfer case (two part casting bolted together in the center).

Can I use ATF in my transfer case?

Most transfer cases are filled with an automatic transmission fluid, which is usually red in colour. Others use a thicker gear oil, and some use a specialized fluid that is specifically made just for that transfer case.

How much fluid does it take to fill a transfer case?

Fill the T-case with 1.4 quarts of fluid or until the fluid begins to come out of the fill location. If the vehicle is not parked on level ground, it is recommended that you at least ensure that you get 1.4 quarts into the T-case. Replace the fill plug with a new plug gasket.

What kind of transfer case does a Ford Bronco have?

The 1980-96 Ford Broncos and Ford F-series offered three main transfer cases. All three transfer cases are chain drive, that require ATF for lubrication as opposed to standard gear lube. The New Process 208 transfer case was available from 1980 to roughly 1985. This is an aluminum case light duty chain drive.

What is a Borg Warner 1345 transfer case?

The Borg Warner 1345 transfer case was available from 1980 to roughly 1989. This is an aluminum case medium-duty chain drive. It feature a manual shift with the gear positions of 2 high, 4 high, neutral, 4 low. Low gear ratio is 2.72:1. Left side front output fixed yoke. Pickup have a rear output slip yoke while the Bronco has a rear fixed yoke,

What is the difference between a pickup and a Bronco?

Pickup have a rear output slip yoke while the Bronco has a rear fixed yoke, The Borg Warner 1345 transfer case was available from 1980 to roughly 1989. This is an aluminum case medium-duty chain drive. It feature a manual shift with the gear positions of 2 high, 4 high, neutral, 4 low. Low gear ratio is 2.72:1. Left side front output fixed yoke.