How do I connect a wireless phone jack?
Receivers plugged into an outlet nearby any of these phone-related devices work the same way as a traditional wall outlet works for the same device. After you set up the transmitter, simply plug the phone cord from your fax machine, satellite receiver or other phone connector into the wireless phone jack receiver.
How do you put an extension on a phone line?
It’s not hard to extend a line from an existing phone jack to a new one in another room. Simply unscrew the existing jack from the wall, and attach the color-coded wires for the new cable to the matching terminals. Then run the cable to the new jack and attach the matching wires to it.
How do I connect my phone to my RCA jack?
Plug one end of the provided telephone cord into the LINE jack on the right side of the base unit, and the other end into phone output of the VoIP decoder box. The base unit’s indicator light should turn green. Plug the phone you use with the decoder box into the PHONE jack on the side of the base unit.
How do I add an extension to my existing wireless phone jack?
Make sure the existing Wireless Phone Jack system (base and extension unit) is powered on. Unplug any cords attached to the Base unit (these will be connected again later) Plug the extra extension into a power outlet near the Base unit and switch power on. This will activate a red light on the Extension unit.
How do I know if my wireless phone jack is installed?
The light on top of the extension unit will after a short period glow green (if switch is on C) or yellow (if switch is on S) The Extension unit is now installed and your Wireless Phone Jack is now ready for use. * You can find more liGo quick start guides on our blog or by emailing us
How do I connect my extension to my phone line?
Plug the phone line cord from your phone, modem, fax or satellite/cable set top box into the Extension unit There is a switch by the connection “S” Speech (phone) and “C” Computer (modem, fax or satellite). Select the switch for which ever item you wish to connect. Plug the Extension unit into a power outlet and switch power on.