Why is my Maytag Bravos XL washer not spinning?
One of the most common reasons a washing machine won’t spin is an unbalanced wash load. During a wash cycle, larger, heavier items can clump on one side of the machine, causing an imbalance that affects the spin cycle. Overloading the washtub with too many items can also cause an imbalance that prohibits spinning.
How do you clear the error code on a Maytag Bravos washer?
Write Down The Error Code! Then press PAUSE/CANCEL once to clear the error code and try to start a new cycle. If code appears again put it through an automatic diagnostic cycle while you enjoy a nice soothing cup of tea. (Watch The Bravos Diagnostics Video) This will reveal any stored error codes.
Why won’t my washer do the spin cycle?
Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.
What does lf mean on a Maytag Bravos XL washing machine?
The LF in the washer code error means “long fill.” It means the washer is taking too long to fill up with water. The main control will shut down if it doesn’t get a signal from the water pressure sensor indicating the water is at the proper level.
What does OL mean on a Maytag Bravos washer?
Overload
Posted: 02/02/16. First, OL stands for “Overload”, so in other words, the washer thinks the tub is too hard to move because it’s overloaded and the motor is struggling or the unit is way out of balance causing the washer to struggle. The most common problem is a nut below the inner tub that needs to “float”.
How do I reset my Maytag Bravos dryer?
The Maytag dryer might display an error code if a problem has arisen with the dryer. Examples of error codes for Maytag dryers include “AF,” “PF” or “F” with a number. To reset the dryer if an error code occurs, press “Power/Cancel” twice and then reselect a cycle and press “Start.”
What are some common problems with the Maytag Bravos washer?
What Are Some Common Problems With the Maytag Bravos Washer? Common problems with Maytag Bravos washers include failure to start, water filling slowly, water leakage, failure of the door or lid to lock and overflowing. Other problems include stopping at mid cycle, loud noise and failure to drain and spin.
How do I know if my Bravo washer is bad?
Review the owner manual as certain things should not go in the washer. Use the “Bulky” cycle for large loads. If the washer dial is flashing, open the lid and redistribute the load as something is out of balance. Bravo washers require less detergent and water for efficient operation.
What is a recirculation pump on a Maytag Bravos washer?
The recirculation pump is the key to the Maytag Bravos water sipping efficiency. Instead of completely filling the washing machine’s tub like most top loading washing machines, only enough water is added to cover the washer’s wash plate and float the inner tub allowing it to lift off the basket hub .
Why does my Maytag Bravo washer make a gurgling noise?
It also makes gurgling noises when the machine drains wash or rinse water. Don’t wash items singularly in the Maytag Bravo washer as this may affect the load balance and cause the washer to not operate well. Review the owner manual as certain things should not go in the washer.