What is a toothing plane for?

What is a toothing plane for?

What Do They Do? We use toothing planes to give tooth to the surface of ground wood that forms the substrate wood for our veneer work. Toothing creates perfect parallel v-shaped cuts about 1mm (1/32″) apart across the surface of the wood we are veneering. Criss-crossing creates a diamond pattern to that end.

What is a toothed plane blade?

A toothing plane is simply a very high angle block plane equipped with a blade that has a serrated edge. The pitch angle of the blade noticeably varies from tool to tool, anywhere from 65 to 90 degrees.

What is a toothing plane blade?

Though traditional wooden toothing planes and modern toothed blades have become well known among woodworkers, they are still underutilized in contemporary shops. With its extremely high-pitched blade (80° to 90°) and serrated cutting edge, the toothing plane cares little about grain direction and figure.

How do you sharpen a diamond plane blade?

The plane blade is sharpened in a similar way to the chisel, to read about this, click here. Spray auto glass cleaner onto each of your diamond sharpening plates, one pump on each plate is plenty. This is used instead of water as water often starts the rusting process on the sharpening plates.

How do you sharpen a Burr plane?

Instead, sharpen the tool as you would a normal bench plane, with one important exception: do not lap the back. I used to knock the burr off, but lately I just roll with it. The teeth are formed by little grooves cut into the back of the blade before it’s tempered. If you lap the back, you lose the teeth.

What angle should I sharpen my blades at?

When sharpening a plane, start with the blade at 30 degrees and end it at 20/25 degrees, this will ensure it has a slight camber to the bevel. This plate generally requires the most work as it will be abrading away the previous dulled edge to form the new cutting edge.