How do you terminate and polish a fiber optic connector?

How do you terminate and polish a fiber optic connector?

Place the prepared cable onto the fiber holder block in the tool kit.

1. Step 2: Epoxy Preparation. Remove epoxy divider.
2. Step 3: Connector Installation. Inject epoxy into connector body.
3. Step 4: Cure the Epoxy. Set-up the curing oven.
4. Step 5: Cleave Fiber and Polish Connector Ends. Cleave the fiber.
5. Step 6: Inspection.

What are the steps to terminate a fiber optic cable?

11 Steps To Terminate Fiber Optic Cables

1. Step 1 – Electricity.
2. Step 2 – Stripping.
3. Step 3 – The Connector.
4. Step 4 – Epoxy.
5. Step 5 – Inserting the Fiber Optic Cable.
6. Step 6 – Crimping the Cable.
7. Step 7 – The Curing Holder.
8. Step 8 – Curing the Cable.

Can you terminate your own fiber optic cable?

1) Prepare the fiber-optic cable for termination as you normally would, by stripping away the outer jacket, buffer, and cladding, and cutting away excess aramid yarn. 2) Using a fiber cleaver (usually included in the toolkits sold for these connectors), score the fiber with a single, light touch.

What is polishing in fiber optic?

Polishing removes any excess epoxy or fiber stub left after cleaving, shapes the ferrule, and removes scratches in the glass, enabling an end finish that passes optical signals with minimum loss. It affects two types of optical loss–insertion loss and return loss.

What is Fibre termination point?

A Termination Point (TP) is a small wall mounted box whereby the optical fibre is terminated in your home. The Termination Point (TP) is installed by the building developer or building owner during the building construction phase.

What is fiber termination box?

Fiber termination box (FTB) generally refers to the box shape fiber optic management products used to protect and distribute the optical fiber links in FTTH Networks. The direct application of termination box is to terminate fiber optic cables and connect the core of the cable and pigtail.

What can damage fiber optic cable?

5 Cable Killers That Destroy Buried Fiber Cable

• Water. We learned early on that water is very detrimental to fiber optic strands.
• Rodents. Since they have a life-long drive to gnaw, rodents are often responsible for extensive damage to fiber optic cable.
• Lightning or Incidental Voltage.
• Construction.
• Ice crush.

Is used to inspect connector to confirm proper polishing?

Connector inspection microscopes focus all the light into the eye and can increase the danger. Microscope Inspection of Connectors (Using microscopes to inspect connectors for proper polishing during termination and finding dirty or damaged connectors in the field.)

How to terminate a fiber optic cable?

There are generally two ways how we terminate fiber optic cables, using connectors or splicing. Designed connectors can be put at the end of a fiber optic strand when terminating a fiber optic cable. Since fiber optic technology was introduced decades ago, numerous connector styles such as SC, FC or LC have been developed.

How do you Polish a fiber optic connector?

Hold the 12um (or 15um) polishing paper (lapping film), dull side against the connector. Point the connector ferrule upward and, using light circular or figure-8 strokes, polish the cleaved fiber down flush with the epoxy bead. Note: This will reduce the risk of breaking the fiber during the first polishing.

How do you connect fiber optic cable to a connector?

Immediately insert the fiber through the connector body, carefully feeling for the ferrule capillary. Rotate the connector body as the fiber is inserted to allow the fiber to pass through the connector body without hanging up. Be careful not to break the fiber.

How do I remove the stripped fiber from the cable?

Pull the fiber from the tool with one smooth motion. Wipe the stripped fiber with a wipe dampened with isopropyl alcohol to remove any residual coating. The recommended dimensions for the prepared cable and fiber are shown below.