How do you put a password on a Polycom phone?

How do you put a password on a Polycom phone?

Once the phone is registered and is in an operational mode you can change the default password on a Polycom phone by doing the following:

1. Click on Menu.
2. Select option 3. Settings.
3. Select option 2. Advanced.
4. Enter Password = 456.
5. Select option 1.
6. Select option 6.
7. Enter Old Password, Set New Password and Confirm New Password.

How do I find my Polycom admin password?

Polycom’s default password is 456….Step 1: Try Reset with Default Password

1. Click on the Home button.
2. Scroll to the Settings (gear icon) and click on it.
3. Go to Advanced.
4. Enter the admin password (456 by default)
5. Go to Administration Settings.
6. Go to Reset to Defaults.
7. Go to Reset To Factory.
8. Say Yes when it asks Are you sure?

How do I reset my Polycom password?

To restore phone to factory defaults with the Admin Password:

1. Power cycle the phone.
2. Press Cancel soft key during the boot process.
3. During the countdown, press and hold the following dial pad keys simultaneously until the password prompt appears:
4. Enter the administrator password to initiate the reset.
5. Press OK.

How do I factory reset my Polycom SoundPoint IP 335?

How to factory reset Polycom 335 IP Phone

1. Step 1 How to factory reset Polycom 335 IP Phone. Hold 1+7+3+5 while powering on the device.
2. By default the password is 456. You can reset the password with the Mac Address on the back.
3. Now that the unit had reset configuration and rebooted select Setup.

How do I reset my Polycom voicemail password?

How do I change my voicemail password using my Polycom phone?

1. Log in to the voicemail by dialing *86 or press the Message key.
2. Enter your password.
3. Press *
4. Press 8 to change the password.
5. Enter and confirm the new password.

How do I reset my Polycom SoundPoint IP 335?

How do I find out what my password is for voicemail?

If you don’t have access to your online account, you can dial in to your voicemail by pressing and holding the ‘1’ key on your phone’s keypad. After your phone connects to the voicemail system, you can access your password settings by pressing ‘*’, followed by the 5 key.

How do I factory reset my Polycom SoundPoint IP 450?

331, 335, 430, and 450 press and hold the 1, 3, 5, and 7 on the dial pad at the same time. b. For SoundPoint IP 301, 501, 550, 600, 601, and 650 press and hold the 4, 6, 8, * on the dial pad at the same time.