How do I print a configuration page on Brother HL 5370DW?

How do I print a configuration page on Brother HL 5370DW?

Hold down Go for 10 seconds. Release Go when the machine prints a Network Configuration page. If you release Go in less than 10 seconds, the machine will print if you have any reprint data. For details on how to print a Printer Settings page, please click here.

How do I setup my Brother HL 5370DW wireless printer?

Power on the printer and see that the machine achieves a Ready state. Now, hold the WPS, SecureEasySetup, or AOSS button on the WLAN router for a few seconds as a step towards Brother HL-5370DW Wireless Setup. Next, press and hold the setup button positioned at the Brother HL-5370DW backside for less than 2 seconds.

How do I reset my Brother HL 5370dw?

Make sure that all the LEDs are off. Press Go eight times. Make sure that all the LEDs light up to indicate the print server has been reset to its factory default settings. The printer will restart.

How do I print my Brother printer configuration page?

How do I print a network configuration page?

1. Press the ‘+’ key until you see “INFORMATION”
2. Press the ‘SET’ key.
3. Use the ‘+’ or ‘-‘ keys until you see “PRINT SETTINGS”
4. Press the ‘SET’ key and the print configuration pages are printed.

How do I reset my Brother HL 5370DW?

How do I reset my brother 5250DN?

When a new drum is inserted into a Brother HL-5250DN, you must reset the drum counter.

1. Step 1: Open the front door.
2. Step 2: Remove the drum unit.
3. Step 3: Press the Go button until all the lights are amber.
4. Step 4: Release the Go button.
5. Step 5: Insert new drum unit.
6. Step 6: Close the front door.

How do I reset my brother hl 5340D?

Brother HL-5340D and HL-5370DW Toner Reset Instructions When all three LEDs are lit, release the Go-button. Double-click the Go-Button button, and the three LEDs should be lit again. Press the Go-Button button six times. Close the front cover and the toner counter must be reset.

What is Brother printer default password?

The default password for most of the models of brother printer is “access”. 7. You can also use Web-Based Management or BR Admin Light to change this password.

Why is brother printer not printing?

Sometimes brother printers will not let you print because it says that you are out of toner even when you are not. There is a way that you can trick the printer into letting you continue to print by placing a small piece of tape over the eye at the bottom of the machine if you remove the imaging cartridge.

How to fix the brother printer error ts-07?

Ensure that your WLAN access point or router is supporting WPS or AOSS.

Make sure that your Brother printer is located close to the WLAN access point or router to establish a connection.

Keep away any hardware that might interrupt the signal,for example your mobile phone.

In the menu of your Brother printer,select your network and enable the WLAN.

What is a brother printer driver?

Brother All-in-One Printer drivers are tiny programs that enable your All-in-One Printer hardware to communicate with your operating system software. Maintaining updated Brother All-in-One Printer software prevents crashes and maximizes hardware and system performance.

What is a brother printer?

About Brother Printer Drivers. Printers are digital devices peripheral to a computer system. Printers enable the user to produce a hard copy of computer data or of digital images. Printers read computer data and interpret that data into a format that can be printed to a sheet of paper.