Why is my 3G MicroCell not working?

Why is my 3G MicroCell not working?

Network light – Restart your MicroCell by unplugging the power cord from the wall outlet for at least 10 seconds. It may take another 30 minutes for the network light to turn solid green. Network and GPS lights – Move your MicroCell to the place where it originally got a solid GPS light.

Does AT 3G MicroCell work with 4G?

An AT MicroCell acts like a mini-cell tower, radiating signal from inside the home or office to give you more bars. It increases you signal strength and is compatible with 2G, 3G, and 4G LTE. The MicroCell needs to be connected to a landline internet service to work.

How do I reset my 3G MicroCell?

Hold in the reset button on the back of the unit (you’ll need a paperclip), turn off the power to it and then restore power holding in the reset button for about 30 seconds. The MicroCell should go thru the entire Initial Activation sequence which will include downloading any updates if they are available.

Are MicroCells obsolete?

As of December 31st, 2017, the AT MicroCell has been discontinued. If you own a MicroCell and rely on it for placing calls at your home or at your office, now may be the time to start thinking about replacing it.

How do I connect to AT 3G MicroCell?

Activate & register

1. Write down your 3G MicroCell’s serial number as you will need it for online activation and for future reference.
2. To activate your AT MicroCell launch your web browser and visit: www.att.com/MicroCell.
3. Locate and click Activate.
4. Tap the desired account type.
5. Click Next.

What is out-of-band management?

Implementation of an out-of-band management solution allows a network administrator to have full control over all the elements in wide area networks when in-band and IP based management strategies fail (via out of band connectivity).

What do I need to get started with AT 3G MicroCell?

AT 3G MicroCell™ User Manual | Getting Started 4 5 Getting To Know Your Device Requirements To use the AT 3G MicroCell™, you need: »High speed Internet service over U-verse®, DSL, or cable. For best performance, download speeds of at least 1.5 Mbps and upload speeds of at least 256 Kbps are recommended.

How to manage out of band management for remote branch office?

Out of band management for remote branch office can done effortlessly by having secure communication over 3g or brand band links, which will make life of Network IT world easy in case of outage or to troubleshoot any issue.

How do I Disconnect my AT microcell?

1 Unplug the MicroCell from the router and the power source. 2 Go to AT MicroCell Online Management. 3 Select your account type. 4 Enter your ID and password. 5 Choose the number linked to your MicroCell and select Continue . 6 Follow the prompts to disconnect your device. See More…